GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: nielsenammo on November 06, 2016, 01:24:57 AM

Title: New Badger Bullet
Post by: nielsenammo on November 06, 2016, 01:24:57 AM

I made a bullet specific to the Badger .40.  I made the bullet per the specs of gun which came out to 220 grains.  We tested this bullet today at 100 yards with great results.  Today's wind was left to right which did push the bullet a little to the right but still able to get good groups.  This group was tethered on a bottle with 3300 psi in it. 

5th shot of course did not push over in the wind like the others but still a good group.  The first 4 shots could almost be covered with a penny and this is a 40 cal bullet.

I plan to cast the bullet and have up on the site available next week.

Title: Re: New Badger Bullet
Post by: Prouzy on November 06, 2016, 08:33:08 AM

Nothing wrong with that! Nice work  ;)