GTA
All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: kp4att on July 07, 2010, 08:41:07 PM
-
HI GUYS!!!
I RECEIVED FROM CROSMAN MY 4TH MARAUDER IN A YEAR, ( THE 1ST ANNIVERSARY OF THE BENJAMIN MARAUDERS) AND THE LAST ONE HAVE ANOTHER PROBLEM.... SUPER VERY INACCURATE (2-5 INCHES) 30 YARDS FROM A BENCH REST..... YES.... SUPER BAD.
I REMOVED THE BARREL I CLEANNED IT UNTIL GET SUPER CLEAN RWS COTTON PELLETS (.177). NOW AFTER THE BARREL CLEAN UP THE MARAUDER IS SHOOTING 1 TO 3 INCHES SPREAD.
WHAT OTHER THING CAN BE CHECK IT TO GET A BETTER ACCURACY? OR I HAVE TO CALL CROSMAN AGAIN?
THEY HAVE RESPOND ME WELL.... WARRANTY PERIOD....BUT 4 RIFLES IN A YEAR.... 2 NEW RIFLES LEAKING FROM FACTORY THE 3RTH I SENT TO THEM FOR A CHECH I RECEIVED IT WITH A BENDED SCOPE RAIL. 4TH MARAUDER VERY INACCURATE.
NOTE: MY NEXT PCP WILL BE ..... DEFENITELY FROM EUROPEAN COMPANY-
100% SURE OF THAT.
/GERALD
-
Hey I don't blame ya on that one. Quality control at Crosman is the pits.....
-
Seems kinda odd.....both my brother and I bought marauders in .22 around the same time and both have proven to be tack drivers........his shoots copperheads quite well and mine shoots ulta mags like they were made for it........I will continue to do business with Crosman, going to buy a trail xl, but I will be buying an Evanix Windy City in the near future too
-
I got my m-rod.22 soon after the 1st.100 and have had zero problems,i preordered the m-rod pistol in May,was getting excited,then bam,will not arrive till november :'(,so i will cancel order and get the m-rod .25 ;D
-
I think quality control from Crosman has been very good, but you have sure had a run of bad luck. The other thing at which Crosman excels is customer support, one of the best in the industry.
My Marauder was excellent out of the box.
Crosman is definitely a resurgent company, making some smart moves in a down economy. Have you considered going the Mac1 route? He has done work for me, and he is top drawer on PCP and gas stuff. He is a Crosman expert.
-
Yes my brother and I RBShoots must have gotten good ones cause their killers we've taken some G Hogs at some pretty good ranges with the ones we got
-
Just found out that Gerald works at the main Puerto Rico elimination House. It is a big place. Gerald is the main guy who does most of the work there. What we never knew about Gerald was that he has Bionic Meat Hooks for hands.
That could explain the problems he has been having with his air guns. Meat hooks and air guns do not mix...:)
-
Gene..... there is not one Benjamin airrifle that could withstand my 5'8" 180 pounds
with a 5k pounds muzzle fingers!!! he he he
Just the RWS and korean Sumatra - are supporting my muzzle fingers for
6 continuos hours on fridays.
oooohhh THANKS GOD.... TOMORROW IS FRIDAY!!!!
SHOOTING RANGE TIME!!!!
ooooo YEEEAAAHHH!!!!
/GERALD