GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Show Off Your Air Guns With Mods (SHOW and TELL) => Topic started by: Arkmaker on September 22, 2016, 01:39:49 PM

Title: Been making a few goodies!
Post by: Arkmaker on September 22, 2016, 01:39:49 PM
Shoes, pins, PA's, Breeches....
Title: Re: Been making a few goodies!
Post by: Tater on September 22, 2016, 02:39:55 PM
Good looking stuff Rich.
Title: Re: Been making a few goodies!
Post by: AmBraCol on September 22, 2016, 03:20:53 PM
Interesting breech you have there.  How is the barrel held in?
Title: Re: Been making a few goodies!
Post by: Arkmaker on September 25, 2016, 12:47:31 PM
Quote from: AmBraCol on September 22, 2016, 03:20:53 PM
Interesting breech you have there.  How is the barrel held in?

(2) 6-32 set screws located facing down towards the tube. Kinda hides them or at least less noticeable.
Rich
Title: Re: Been making a few goodies!
Post by: AmBraCol on September 25, 2016, 08:39:48 PM
Quote from: Arkmaker on September 25, 2016, 12:47:31 PM
Quote from: AmBraCol on September 22, 2016, 03:20:53 PM
Interesting breech you have there.  How is the barrel held in?

(2) 6-32 set screws located facing down towards the tube. Kinda hides them or at least less noticeable.
Rich

So they're on the bottom of the breech, hid from view when the breech is installed?  Interesting approach.  I love seeing how folks approach the same problem from different angles.
Title: Re: Been making a few goodies!
Post by: Arkmaker on September 26, 2016, 02:21:35 PM
Let's see if I have a better pic
Title: Re: Been making a few goodies!
Post by: Tater on September 26, 2016, 02:34:42 PM
Great idea locating them there. Make sense.
Title: Re: Been making a few goodies!
Post by: AmBraCol on September 26, 2016, 10:00:12 PM
 ;D

OK.  I was wondering how you fit two in the very short space available.  Not in the bottom, on the sides, towards the bottom. Gotcha.  1,000 word pic did the  trick.  Thanks!

 ;D ;D ;D
Title: Re: Been making a few goodies!
Post by: kj on January 17, 2017, 03:48:38 AM
nice trigger shoe. gives alittle legnth of pull. i really dislike the hard curve of stock crosman triggers. tried to get some guys to make a trigger that is adjustable for length of pull and verticle orientation and rotation..like a target gun.

peace
kj