GTA
Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: anoman1 on June 14, 2016, 11:20:24 PM
-
I read a post on someone saying that the 1.8k bust disk was blowing using a shoe box compressor. so i replicated the issue and it damages the o-rings in side the regulator, Just so that over a time period it will exceed the set pressure. Mine lasted about 4 hours before bursting. after looking at the o-rings under a ultra fine lens I could see a flat spot all the way around the second o-ring, The first o-ring looked OK till i looked closer. and yes it was damage as well. after replacing the top two o-rings 24 hours later still holding Air. replaced the two o-rings on piston with UC90012 from the O store.
Not sure if anyone has posted this info, if so just a reminder.