GTA

Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: Berky on May 05, 2016, 04:26:49 PM

Title: Paint ball tank conversion
Post by: Berky on May 05, 2016, 04:26:49 PM
What does it tank to convert and use a 68ci ninja paint ball tanks for pcp filling?

Thank!
Title: Re: Paint ball tank conversion
Post by: Motorhead on May 05, 2016, 04:38:42 PM
A different regulator capable to discharge 3K and then the fill manifold & bleeder/hose parts too.

BEST SET UP ... a Non Regulated valve & gauge / hose set from Joe B that replaces the whole paintball reg parts all together  :D 
Title: Re: Paint ball tank conversion
Post by: benj397 on May 05, 2016, 10:09:52 PM
Have you checked to see how many fills you'll get from the 68 ci tank?  May be better to sell it to a paint baller and put the money towards a guppy from Joe.  It comes with a slo-flow valve and microbore hose and holds almost twice the air as the 68 ci tank.

Here's a calculator.
http://www.calc.sikes.us/2/ (http://www.calc.sikes.us/2/)

68 ci (4500 psi rated) is 12.2 CF
Title: Re: Paint ball tank conversion
Post by: Berky on May 05, 2016, 10:18:20 PM
Have you checked to see how many fills you'll get from the 68 ci tank?  May be better to sell it to a paint baller and put the money towards a guppy from Joe.  It comes with a slo-flow valve and microbore hose and holds almost twice the air as the 68 ci tank.

Here's a calculator.
http://www.calc.sikes.us/2/ (http://www.calc.sikes.us/2/)

68 ci (4500 psi rated) is 12.2 CF

Sounds like the way to go.

Anyone have a guppy ready to go and want to sell, get back at me, thanks
Title: Re: Paint ball tank conversion
Post by: benj397 on May 05, 2016, 10:29:37 PM
Put a WTB ad in the classifieds here.  Might also put one on the Yellow classifieds.