GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: TheLakeRat on April 07, 2016, 11:27:11 AM
-
In the spirit of always looking for bigger and better,
It seems to me the Reservoir for the Benjamin Air-bow is 3 to 4 inches longer than the Bulldog.
I wonder if the larger could be transplanted into the bulldog?
I realize that we would loose the rail on the bottom of the barrel shroud but again i'm just posing a possible upgrade question.
-
:o wow the crickets are loud in here
-
340cc stock airtank not enough? The Airbows tank is totally different with a regulator inside, and I suspect would never work because the Bulldogs Breech/Receiver was specifically designed for its current air cylinder.
Evidence is the Air Gauge/Manometer and fill location are both on the Airbows airtank, and both of those items are integrated in the Bulldogs receiver instead. Also what is the listed volume of the Airbow tank? rhetorical, its not listed.... would not work, does not matter, and the Bulldog does not need it. But maybe you should buy one and try for yourself to be sure ;)
-
340cc stock airtank not enough?
Probably so, but is a 4cyl car enough? probably so but a v8 is much more fun! ;D
But i see your point on the regulator. Just wondering if the tube would be interchangeable with the stock regulator? probably not but it is a possible thought vs just a tank extension.
The bulldog and the the Airbow are new and very little experimentation has been done with them.
Just searching for ideas
-
Can always tether a pony bottle :)
-
Well I agree with you thelakerat, I have dream with a larger reservoir tank 500cc @ 4500psi with a HUMA or better regulator set to 3000 psi, is that too much to ask?
Cheers to all,