GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: David Mccann on March 25, 2016, 12:22:34 PM

Title: does anyone have a source for a decent gauge for the disco?
Post by: David Mccann on March 25, 2016, 12:22:34 PM

 where do you guys get yours?

Title: Re: does anyone have a source for a decent gauge for the disco?
Post by: ezman604 on March 25, 2016, 01:09:33 PM

I generally order replacements direct from Crosman. But I believe McMasters-Karr has a descent one that will replace it.

Title: Re: does anyone have a source for a decent gauge for the disco?
Post by: Geoff on March 25, 2016, 01:14:13 PM

High-Pressure Miniature Gauges   search that on mcmaster.. I bought one for my disco from them

http://www.mcmaster.com/#atmospheric-pressure-gauges/=11p0gcr (http://www.mcmaster.com/#atmospheric-pressure-gauges/=11p0gcr)

Title: Re: does anyone have a source for a decent gauge for the disco?
Post by: David Mccann on March 25, 2016, 01:28:01 PM

ok ill check it out. i saw a post somewhere here, with a pic of a liquid filled gauge.

Title: Re: does anyone have a source for a decent gauge for the disco?
Post by: ezman604 on March 25, 2016, 01:38:12 PM

Did a search...here are a few posts.

http://www.powermaxhipac.com/7--accessory-coming-soon.html (http://www.powermaxhipac.com/7--accessory-coming-soon.html)

http://www.gatewaytoairguns.org/GTA/index.php?topic=47208.0 (http://www.gatewaytoairguns.org/GTA/index.php?topic=47208.0)

http://www.gatewaytoairguns.org/GTA/index.php?topic=59640.msg577743#msg577743 (http://www.gatewaytoairguns.org/GTA/index.php?topic=59640.msg577743#msg577743)

http://www.gatewaytoairguns.org/GTA/index.php?topic=36100.msg337195#msg337195 (http://www.gatewaytoairguns.org/GTA/index.php?topic=36100.msg337195#msg337195)

Title: Re: does anyone have a source for a decent gauge for the disco?
Post by: David Mccann on March 25, 2016, 01:40:40 PM

High-Pressure Miniature Gauges

    Use with air, water, hydraulic oil, and natural gas
    Pipe Connection: Nickel-plated brass NPT male
    Accuracy: ±5% full scale (Grade D)

Monitor high-pressure applications that are low on space. Case is nickel-plated brass and lens is impact-resistant polycarbonate. Temperature range is -50° to 160° F.
Available Pressure Ranges (psi)
Pressure
Range   Grad.
Marks   Numeric
Increments
0-160   8   40
0-300   20   100
0-500   20   100
0-750   50   200
0-1,200   80   400
0-4,000   200   1,000
0-5,000   200   1,000
0-6,000   500   1,000
      
      
Center Back
Connection
Dial
Size   Pipe
Size       Each
         
1"   1/8   9767T21   $10.78
      
Product Detail
High-Pressure Miniature Gauge, Nickel-Plated Brass Case, 1" Dial, 1/8 NPT Center Back
   Pressure Range, psi
0-160
0-300
0-500
0-750
   
0-1,200
0-4,000
0-5,000
0-6,000   




 is this suitable???

Title: Re: does anyone have a source for a decent gauge for the disco?
Post by: RatRacer on March 25, 2016, 02:14:45 PM

Quote from: David Mccann on March 25, 2016, 01:40:40 PM

High-Pressure Miniature Gauges

    Use with air, water, hydraulic oil, and natural gas
    Pipe Connection: Nickel-plated brass NPT male
    Accuracy: ±5% full scale (Grade D)

Monitor high-pressure applications that are low on space. Case is nickel-plated brass and lens is impact-resistant polycarbonate. Temperature range is -50° to 160° F.
Available Pressure Ranges (psi)
Pressure
Range   Grad.
Marks   Numeric
Increments
0-160   8   40
0-300   20   100
0-500   20   100
0-750   50   200
0-1,200   80   400
0-4,000   200   1,000
0-5,000   200   1,000
0-6,000   500   1,000
      
      
Center Back
Connection
Dial
Size   Pipe
Size       Each
         
1"   1/8   9767T21   $10.78
      
Product Detail
High-Pressure Miniature Gauge, Nickel-Plated Brass Case, 1" Dial, 1/8 NPT Center Back
   Pressure Range, psi
0-160
0-300
0-500
0-750
   
0-1,200
0-4,000
0-5,000
0-6,000   




 is this suitable???

Yessir.

Title: Re: does anyone have a source for a decent gauge for the disco?
Post by: David Mccann on March 25, 2016, 03:56:29 PM

thanks guys

Title: Re: does anyone have a source for a decent gauge for the disco?
Post by: wll2506 on March 25, 2016, 08:46:22 PM

Quote from: David Mccann on March 25, 2016, 12:22:34 PM

where do you guys get yours?

Just bought two from McMaster-Carr 0-4000 for both my Discos.... I'm pushing 2000+ psi and I need an accurate gauge !

wll2506