GTA
All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: lefteyeshot on February 18, 2016, 12:15:26 AM
-
Found a RWS 320 on a trip to Santa Fe with Miss Baby. It was on consignment at a gun shop for $150. Don't know if that's a good price or not, but you know---had to have it.
Tell me about the trigger. There's the adjustment screw you can access thru the hole in the trigger guard I guess is for pull? But what is the screw on the front of the trigger assembly box, first stage? The back trigger guard screw surprised me but I figured it out. Used a little molly to hold the nut in place while I put the screw back in. The cocking shoe the end of the linkage fits into was a nice quality touch. I guess it's a R7 knock off.
Also bought a Slavia 631 Lux Model 77 from them for $175. Same thing, had to have it. The wife took me with her so she had someone trainable to carry the luggage so I deserved something.
Thanks, Tim
-
if I remember correctly, the RWS 320 is a chinese clone of the HW95/R9. The trigger can probably be adjusted using instructions for a B26 trigger or the Rekord trigger.
-
Thanks.
-
I was able to get the trigger down to about 2 1/2 lbs.S JSB 7.87 grs domed about 850fps. At 25 yards holes about touching.
-
Hey Tim sounds like you got a good'un, bring it to the fun shoot and we can go through all the different pellets that we have and see if we can find that magic one... 8)
-
10-4, I'll bring the new ones and the usual suspects. Ordered me some sticks.
-
Which ones did you order?
-
Hammers off amazon.