GTA

Airguns by Make and Model => Hatsan Airguns => Topic started by: bebanovich on January 03, 2016, 05:51:07 PM

Title: H95 - hex size for muzzle break?
Post by: bebanovich on January 03, 2016, 05:51:07 PM

I don't seem to have an Allen wrench to fit the muzzle break on the Hatsan 95. Anyone happen to know what size I should grab from the hardware store?

Title: Re: H95 - hex size for muzzle break?
Post by: AudiS4 on January 04, 2016, 05:16:36 PM

It's only pressed/hammered in place. No screw holding it on.

Title: Re: H95 - hex size for muzzle break?
Post by: bebanovich on January 04, 2016, 06:30:34 PM

Quote from: AudiS4 on January 04, 2016, 05:16:36 PM

It's only pressed/hammered in place. No screw holding it on.

I'm guessing there is a difference between mine and the QE model. Mine looks like the one below. My old, blurry eyes perceive a set screw that I have a compulsive desire to snug down.  :D
(http://www.jefklak.com/wp-content/uploads/2014/06/Hatsan-95-Air-Rifle-Combo-2.jpg)

Title: Re: H95 - hex size for muzzle break?
Post by: AudiS4 on January 05, 2016, 08:23:57 PM

Ahaaaa that wasn't on my when I removed my muzzlebreak. I have a self-made QE, with a shortened barrel and then a AT 44 moderator fitted. It's a standard 95, bought a Vortex piston, and then the tune and removal of iron sights.