GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Korean Gate => Topic started by: JimmyBobby on November 21, 2015, 03:51:16 PM

Title: .25 JKHan Noblesse Too Loud
Post by: JimmyBobby on November 21, 2015, 03:51:16 PM
Anyone have success in taming the noise these guns put out?  Both the ping and the bark are more than I like to put up with.

(http://s15.postimg.org/rnhijpqqj/1a1aanob.jpg) (http://postimage.org/)
photo upload sites (http://postimage.org/)
Title: Re: .25 JKHan Noblesse Too Loud
Post by: rkr on November 22, 2015, 07:45:38 AM
Quote from: JimmyBobby on November 21, 2015, 03:51:16 PM
Anyone have success in taming the noise these guns put out?  Both the ping and the bark are more than I like to put up with.

(http://s15.postimg.org/rnhijpqqj/1a1aanob.jpg) (http://postimage.org/)
photo upload sites (http://postimage.org/)

Depinger and LDC should fix your problems. Evanix depinger should work in these guns and LDCs made for evanix might also work as they are pretty much the same gun.
Title: Re: .25 JKHan Noblesse Too Loud
Post by: KRJoye on December 03, 2015, 09:19:49 AM
The JKHan Moderator will help, provided you insert some kind of baffle mat'l. I stacked plastic pill bottle caps tight in mine. Drilled holes(slightly oversize for caliber) in cap centers. Certain pill bottle O.D.s fit perfect!
Title: Re: .25 JKHan Noblesse Too Loud
Post by: cpt_sfc on December 11, 2015, 12:22:33 AM
I don't have what you do but I have a .25 JKhan  bullpup, it was loud. I took out the plug in front and had about 3 inches of space, Sooo! I took several of extra marauder baffle and cut them shorter and stacked em in there with a little tape around them to center and snug up. Made it quieter. Did not affect group size at all.