GTA
Air gun Entertainment and reviews => Hajimoto Productions => Topic started by: Cajunhoss87 on May 08, 2022, 12:09:22 AM
-
Looking for the threads to the below adapter on my Nova Freedom so I can have a bottle adapter made. My check valve seal went bad and my rifle won't pump. I'm ready to bottle it but I can't find a decent priced adapter anywhere. Can anyone make one for me? Don't care about a plenum yet but it seems that the existing burst disc could be a great place for a screw in plenum instead of the small pinned tube above the pump. Thinking I'll just shorten the small reservoir and plug and play. I drew out my best guess.
-
Had the same thing happen to my Aspen. To bad Duy isn't taking orders right now.
-
Do you know anyone who happens to be making just the M16x1.0 asa adapter?
-
Do you know anyone who happens to be making just the M16x1.0 asa adapter?
Have you tried Best Fittings (K) or Joe Brancato Air Tanks for Sale
https://www.bestfittings.co.uk/ (https://www.bestfittings.co.uk/)
http://www.airtanksforsale.com/ (http://www.airtanksforsale.com/)
Hopefully a member with the ability to make one for you will chime in.
If that happens, please share the contact info.
I need an adapter
Male M20.5 x 1 to Male M18x1. 5
Good luck
Ed
-
Can anyone confirm the threads foing itno the receiver on the Seneca Aspen/ Nova Freedom input adapter?
-
I'm looking for this too. Did you ever find out?
-
No haven't found out anything. It's really frustrating that the there is an adapter for the Nova Liberty/ Avenger but not for the Freedom/ Aspen that could benefit the most from it.
Best I can tell is to have a machine shop make a custom one off.
-
Justin ,
I can make the adapter, making it from scratch might be pricey , but what about i make the adapter to asa from the stock part by simply adding a hex ASA on the right side . like this
https://www.amazon.com/Interstate-Pneumatics-WRCO2-320-38-Paintball-Disposable/dp/B072XNYS5B/ref=sr_1_40?crid=357ZVIVSIE9LC&keywords=co2+adapter+paintball&qid=1698238037&sprefix=co2+adapter+pain%2Caps%2C872&sr=8-40
send me the factory adapter, ill do it to my OWN spec and test the seal to 4000 and send it back. If you want a completely original part, I dont have time for that and it would cost as much as the gun. Anyway , just giving you an option to reliably mount tanks to the gun.. If not interrested , no biggie , just throwing it out there because its pretty straight forward.
-
I'd buy one too Rob, if you're willing to do more than one. Thought it may make it a little more worth your trouble, instead of setting up for just one part.
-
I'd buy one too Rob, if you're willing to do more than one. Thought it may make it a little more worth your trouble, instead of setting up for just one part.
And another buyer here as well, Rob
Edward
-
well id be taking the factory part and adding the asa. So thered be no going back. Yes, I could make the connector part( left side ) from scratch ,. but that doubles the labor and price. If you want the adapter done , send me a PM , ill send my address , turnaround time will be less than 24 hrs.Make sure youre return address is legible , and add your user name to the envelope in case i need to reach you on here.
-
another option is adding the asa to the end of the adapter ( right side ) and this way it would be reversible. downside is the tank would sit further out
-
I'd prefer to keep mine as short as possible. I'm planning on a 220cc CF bottle and shortening the barrel a little.
-
yea, that 1 inch section out front will serve no purpose.( other than reverting back to the pump system in the future
-
Gotcha.
For anybody following along, please don't copt the guy in the video. He says he used regular hardware store stuff, I think he said Home Depot 😨
-
yea, that 1 inch section out front will serve no purpose.( other than reverting back to the pump system in the future
Rob M
I remain interested, but a little confused.
PM on the way
-
ok,, to clarify something
You would be sending your adapter as pictured above in post" reply 4 " by justin,
Id then take that part, part off the useless side ( right side ) and add the hex asa adapter by drilling and threading the part. Id seal it , and send it back to you ready to install. hope that clarifies any confusion. The cost will be relatively low with the information I have soo far
One more thing worth noting , youd need a regulated tank to use the proposed adapter, unlike the home depot solution up top.
-
"Id then take that part, part off the useless side ( right side ) and add the hex asa adapter by drilling and threading the part"
sooooo cutting off that 1 inch, rethreading it for the ASA adapter and reinstalling it lets me use a reg'd bottle?
oh man yer killing me.... PM inbound
-
Check with Wayne at Alien Airguns and bargains. https://www.ebay.com/str/alienairgunsandbargains He's also on Facebook.
-
Palmers can make you one or buy the adapter and thread the 16mm end.
Call for a quote.
https://palmerspursuit.com/products/copy-of-825x14-female-paintball-asa-blank-1-diameter-ready-to-mod-or-customize