GTA

All Springer/NP/PCP Air Gun Discussion General => 3D printing and files => Topic started by: Marquette on April 19, 2021, 01:04:28 AM

Title: Crosman 1322 stock cheek riser
Post by: Marquette on April 19, 2021, 01:04:28 AM
Hi
    Anyone printing a cheek riser to fit the 1322 stock?
Title: Re: Crosman 1322 stock cheek riser
Post by: Marquette on April 19, 2021, 11:44:44 AM
I found a 1322 cheek riser on Thingiverse by a designer Dustybarn.  Looks like a nice riser.  How do I get one printed? 
Title: Re: Crosman 1322 stock cheek riser
Post by: Insanity on April 19, 2021, 08:13:07 PM
There are several members who can print it for you. I can but I would like to see other members get some business also. I have a large order in and waiting on a new main board for my ender 3 to come in to finish that up.
Title: Re: Crosman 1322 stock cheek riser
Post by: Marquette on April 19, 2021, 08:19:44 PM
I didn’t know there were members who offered that service. How do I contact them?  Should I post in the classifieds?   Thanks for the guidance to how to get it printed.
Title: Re: Crosman 1322 stock cheek riser
Post by: Insanity on April 19, 2021, 08:22:42 PM
You can post there it may get you quicker response than this gate. At one time I had a list of members who offer printing services but that list is now gone. If noone offers to help I will do it but the wait time may not be acceptable for you.
Title: Re: Crosman 1322 stock cheek riser
Post by: Bentong on April 19, 2021, 08:29:35 PM
https://www.combathunting.com/SKS_RIFLE-SKS_Rifle_Cheek_Rest_For_Ultralight_SKS_Stock.html (https://www.combathunting.com/SKS_RIFLE-SKS_Rifle_Cheek_Rest_For_Ultralight_SKS_Stock.html)
Title: Re: Crosman 1322 stock cheek riser
Post by: Marquette on April 19, 2021, 08:54:53 PM
Hi
   I already have a ATI SKS cheek riser.  Looking for something a little higher and more stable on the top of the stock
Title: Re: Crosman 1322 stock cheek riser
Post by: CraigH on April 19, 2021, 09:05:56 PM
The ATI SKS cheek riser works quite well with perhaps 5 minutes using a rat-tail file to contour the contact points to the shape of the 1399 skeleton stock.
Title: Re: Crosman 1322 stock cheek riser
Post by: scion19801 on April 19, 2021, 11:08:21 PM
I could do it with no issue in pet-g. I have black or grey. I’ll get it downloaded and loaded into my slicer tomorrow afternoon. Then we can discuss pricing once I see what the print hours are one and material use. That is if you’re still looking for it.
Title: Re: Crosman 1322 stock cheek riser
Post by: Insanity on April 19, 2021, 11:18:52 PM
Thanks Dan hope you can help him out.
Title: Re: Crosman 1322 stock cheek riser
Post by: Rick67 on April 19, 2021, 11:45:46 PM
Quote from: Marquette on April 19, 2021, 08:54:53 PM
Hi
   I already have a ATI SKS cheek riser.  Looking for something a little higher and more stable on the top of the stock



Check out this guy's Crosman 1399 cheek riser:



https://www.gatewaytoairguns.org/GTA/index.php?topic=186078.0 (https://www.gatewaytoairguns.org/GTA/index.php?topic=186078.0)



Personally, I do not like 3D-printed stuff, but it is what you want.

His looks to be an excellent design though.
Title: Re: Crosman 1322 stock cheek riser
Post by: scion19801 on April 20, 2021, 11:49:17 AM
ok so I got it loaded up and into my slice gonna be a 10 hour and 30 min print. so that is no issue. once i hear from you it's just a matter of loading it to my printer and letting it run.
Title: Re: Crosman 1322 stock cheek riser
Post by: Marquette on April 21, 2021, 02:01:40 AM
scion19801
      Sent you a pm. 
Title: Re: Crosman 1322 stock cheek riser
Post by: scion19801 on April 21, 2021, 02:42:20 AM
Got it. I’ll get the print started tomorrow morning. If all goes well I might even be able to get it mailed tomorrow as well. If not the following day.
Title: Re: Crosman 1322 stock cheek riser
Post by: scion19801 on April 22, 2021, 03:54:20 PM
Part printed flawlessly and has been dropped off to USPS and is on its way to you. TY for your business Marquette.