GTA
All Springer/NP/PCP Air Gun Discussion General => Vintage Air Gun Gate => Topic started by: bnt55 on February 10, 2018, 10:19:06 PM
-
I am having some issues rebuilding my Crosman 105 Bullseye, my main problem is that I cant seem to find an exhaust valve gasket to replace the dried up broken one that fell apart. Does anyone know a resource for this part or a DIY work around? I ordered a rebuild kit from airgunsmith.com and I'm pretty sure it did not have the correct intake and exhaust seals in the package and it definitely did not have the exhaust gasket.... :'(
-
Here's a couple links that may help. First is a link to the schematics and parts list for your gun. You might actually try calling Crosman and see if they still carry them and you'll need the part numbers when you call. the second and third links are to a couple of websites that may have what you need if Crosman doesn't.
Hope this helps a little!
https://www.dropbox.com/s/vibpk25ohi819kk/Crosman_C105_C106.pdf (https://www.dropbox.com/s/vibpk25ohi819kk/Crosman_C105_C106.pdf)
https://www.bakerairguns.com/ (https://www.bakerairguns.com/)
http://www.jgairguns.biz/ (http://www.jgairguns.biz/)
-
Also try Rick at Precision Pellet. http://www.airgunshop.net/ (http://www.airgunshop.net/)
-
Also try Rick at Precision Pellet. http://www.airgunshop.net/ (http://www.airgunshop.net/)
X2!
-
Thanks for the replies! I ended up using a variety of o-rings I had in the garage along with some hillbilly engineering and it
is holding air and shooting as good as new. ;)