If that doesn't work for you, Neil Clague, Will Piatt, and Roy Karsten build LDCs for the recluse.http://petersoncorner.com/clague/default.htm Neilhttps://sites.google.com/site/saddlemountaingunsmith/ Willrapidroy2002@yahoo.com Roy
Quote from: maraudinglizard on July 30, 2017, 09:09:39 AMIf that doesn't work for you, Neil Clague, Will Piatt, and Roy Karsten build LDCs for the recluse.http://petersoncorner.com/clague/default.htm Neilhttps://sites.google.com/site/saddlemountaingunsmith/ Willrapidroy2002@yahoo.com RoyIt won't help if the barrel is the problem, every LDC will be off the barrel centerline. I had similar problem with my .357 Evanix.
Quote from: rkr on July 30, 2017, 09:27:57 AMQuote from: maraudinglizard on July 30, 2017, 09:09:39 AMIf that doesn't work for you, Neil Clague, Will Piatt, and Roy Karsten build LDCs for the recluse.http://petersoncorner.com/clague/default.htm Neilhttps://sites.google.com/site/saddlemountaingunsmith/ Willrapidroy2002@yahoo.com RoyIt won't help if the barrel is the problem, every LDC will be off the barrel centerline. I had similar problem with my .357 Evanix.Exactly! So instead of spending another $160 For a new one.... the reason I came to that conclusion was while I was at will Pirates house he said to me that the LDC that you bought from mr. Kaston is probably perfect but , the barrels or the bore don't lineup.... so that told me that if I bought a new one I would have the same problem ....so the solution was to file it down and by golly it worked!! Again I am so freaking happy right now I kissed my recluse and I hit bull's-eyes at 50 yards with round balls for a half hour ( I'm outta air) ....I'm a very very very happy man this morning.... God is good
I don't know why but the Koreans seem to have a problem with making quality threads and centering their bores on some of their guns. I recently had a Sam Yang barrel sent to me that when chucked in my lathe the threads on the barrel had a very visible run out, almost wobbling. The threads were not even identifiable with pitch gauges so I had to decline the build and give my customer a refund. If the barrel and threads are not true you could have 20 LDC's made and every one of them would clip. Most shooters do not understand that just making an LDC accurately does not guarantee that it will not clip, there are too many other factors involved. But, most clipping can be fixed fairly easily, unless you have a barrel like the one I had here, that was a no win situation! Good shooting, Neil.,