GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: hammer0419 on January 11, 2014, 10:54:09 AM
-
I have a new Synrod .25 that should be here this week. I have been looking for after market parts. I have found a lot of reviews on what some believe works and doesn't work. Some believe the #10 hammer spring works and some say it doesn't? From reading it looks as if several parts are upgraded they together will give better results to the gun. Not just changing the spring? When I searched for parts I found "ADDICTED 2 AIRGUNS", but quickly found out he has taken a break. Is there any other place that offers all the items he made?
-
I assume these parts will fit, I have the airtube extension and the shroud extension on my original mrod.This guy is great to deal with. http://marmotmilitia.com/index.html?m (http://marmotmilitia.com/index.html?m)
-
Thank you for the link.
-
We're not reading many threads on guys tearing into these version 2 m-rods.
But are reading changes made were not that broad in scope either ???
Trigger location changed, so trigger group differs, main tube also changed due to this as did stock.
Valve got a slight redesign, but poppet carries over from the old.
Upper receiver changed, but barrel sizing within remained.
-
Thanks for the replies. I will just keep an eye out here for professional opinions once this model gets used and worked with some more.
-
Marmot militia`s air tube ext. does fit the new Syn-Rod & shroud ext. fits too.Rifle is about 48" long & barrel heavy.If you have a heavy scope it may balance out but mine is barrel heavy with about 18 oz. scope & mounts.
-
I assume these parts will fit, I have the airtube extension and the shroud extension on my original mrod.This guy is great to deal with. http://marmotmilitia.com/index.html?m (http://marmotmilitia.com/index.html?m)
Unless your name is Tom/Critter99 and you sent him a BSA barrel to fit to a 25 Marauder.
cheers,
Douglas