• Jefferson State Airrifles
  • Air Gun Web - Expert Airgun Reviews
  • Hajimoto Productions
  • Airgun Angie - Backyard Shooting
  • Nielsen Specialty Ammo
  • Dynamic Air Rifles
  • FX Airguns
  • DonnyFL - When silence is a priority
  • Airgun Archery Fun
  • Pyramyd Air
  • Saber Tactical
  • New England Airgun
  • Umarex Airguns
  • Contact us
  • Utah Airguns
  • SEKHMET Airgun Accessories
  • Freedom Gun Targets
  • Evanix Airguns at Airgun Pro Shop
Jefferson State Airrifles
Air Gun Web - Expert Airgun Reviews
Hajimoto Productions
Airgun Angie - Backyard Shooting
Nielsen Specialty Ammo
Dynamic Air Rifles
FX Airguns
DonnyFL - When silence is a priority
Airgun Archery Fun
Pyramyd Air
Saber Tactical
New England Airgun
Umarex Airguns
Contact us
Utah Airguns
SEKHMET Airgun Accessories
Freedom Gun Targets
Evanix Airguns at Airgun Pro Shop


Author Topic: Umarex Colt Peacemaker .177 pellet  (Read 1022 times))

Offline Blue

  • N.U.A.H. Club
  • Expert
  • *****
  • Posts: 1274
  • yes
  • Real Name: Blue
Umarex Colt Peacemaker .177 pellet
« on: March 13, 2019, 06:53:50 PM »
Exactly one month ago today I picked up an Umarex Colt Peacemaker in .177 pellet (rifled barrel).

I can honestly say that I am surprised by how much I have really enjoyed shooting it!

Just roughly estimating, I'd say I've put 1500 shots through it since picking it up. It MOST DEFINITELY scratched the single action-fixed sight-western revolver itch I had and if it breaks today I'll start shopping for another!

Here are my thoughts so far.

First, grips and CO2. The left side grip panel comes off to expose the CO2 cartridge’s compartment, at the bottom of the grip is an attached hex key to screw in the CO2 cartridge from the bottom. Very similar to a lot of CO2 guns in operation but no “twisty tab” hanging down at the bottom of the grip. The wrench in the panel also helps a little with the weight and “feel”. They sound a little hollow and plastic-y when tapped with a fingernail with the worst area being the top of the right (fixed) grip panel. It bothers me less and less so I'm moving away from thoughts of adding a dab of epoxy under that little spot.

Balance and feel. The balance is VERY close to a New Vaquero I can compare it to. I'd say it’s a little lighter in the grip making it slightly more nose heavy. If you're looking for an EXACT match for balance it wouldn't be hard to find a little space in the grips to add some weight and not much would be needed.  It feels very solid and aside from not being able to remove the base pin and pull out the cylinder, it's remarkably similar in size, feel, and operation to its powder burning cousin.  The grip is a little bigger because of the CO2 cartridge but this just means I don't have to drop my pinkie under the grip with this one.

Pellets load into the “bullet” shaped cartridges and are held at the end by a soft plastic sleeve. The inside of the cartridge tapers down and acts as a small smooth bore section before it enters the barrel and rifling.  The cartridges are .357 in size despite the “cloned” .45 engraving on the left side of the barrel. It came with six silver cartridges, I've been buying brass colored cartridge sets online to fill more bullet loops for reloading before having to stop to really reload.

There's no four click C-O-L-T cock. It sits uncocked at what would be the first cock so you get -O-L-T when pulling the hammer back to full cock from rest. The loading gate will open regardless of hammer position but needs to be at “half” cock or better to rotate. I stick to old school loading. Load one, skip one, load four, down on an empty chamber. After loading, “third” click is pretty weak but full cock is nice and solid. After writing all that, I wonder how forum filters will deal with all those “cocks”.

It fits every piece of leather I have for a SAA/clone and the “bullets” fit .357 cartridge loops.  LOTS of fun throwing it in a holster, loading up the loops and feelin’ old time-y.

It's as accurate as I could hope for. The front sight is MUCH lower than the Ruger I can compare it to but since I've been shooting it at mostly 5 meters it's been fine. I've got the stainless version and glare on the front post from strong light on one side or another can effect my aim so I have to be aware if I'm going for small targets.  This may not be as big of an issue for the blued versions. I do get occasional fliers which I'd attribute to either cheap pellets or possibly being seated a little funny before firing.  If I was going for a “cowboy action” type session with big targets (maybe paper plates) at close ranges (5 to maybe 10 meters) I think I'd do okay even with the fliers. I mostly shoot small paper targets, spent CO2 cartridges set up like bottles, and 3/4” to 2” spinners at 5 meters and switch between one and two hands. I think most of the time when I miss, it's me.

The trigger feels pretty good, is relatively light (I don't have a scale), and breaks really nice with a smooth steady pull.

It's really quiet compared to the other CO2 guns I've had. Not as quiet as something with a TKO but I have no problem playing in the basement when someone is asleep in the house.

I'd say I'm getting around 70-80 shots per CO2 cartridge.  This is a low power plinker not a hunter. Perfect for practicing SAA/Cowboy shooting, basement galleries, and knocking down cans.

I think a perfect afternoon could be spent with a pack of paper plates, a sack full of soup cans, and a split rail fence to shoot ‘em off of!!!
  • Colorado

Offline Knothead

  • Plinker
  • **
  • Posts: 138
  • yes
  • Real Name: Mark
Re: Umarex Colt Peacemaker .177 pellet
« Reply #1 on: March 13, 2019, 09:25:23 PM »
Thanks for the write up.  One of these is in my very near future.  I picked up the 586 this last week and simply love it.  After reading this I will need a single action.  It and my daisy can launcher need to get together as it warms up and the boys come over. 
We have been shooting red riders at the can launcher after they run out of centerfire ammo when they come. 
  • USA, OK, Sand Springs
Mark Hogan

Offline hahnr7

  • Shooter
  • *
  • Posts: 15
  • yes
  • Real Name: Russell
Re: Umarex Colt Peacemaker .177 pellet
« Reply #2 on: March 14, 2019, 09:12:19 PM »
Thanks for taking the time, great write up. On me short list, hoping to bring the wife back to the shooting range.
  • austin, Texas
71 Winchester 427 (first air rifle, need spting and seals)
78 blue streak (resealed dec 2018)
Mendoza .22 (crosman branded)
1300KT (.177 14") (.22 18")
Walther lgv challenger .22 (2013)
397 S

Offline Wayne52

  • GTA Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 26529
  • Real Name: Wayne
Re: Umarex Colt Peacemaker .177 pellet
« Reply #3 on: March 14, 2019, 09:47:28 PM »
They are a lot of fun plinking with !!!

  • Michigan
HHDSUPCOM Cam Rahn Bay VN 71-72

My F10 Shoebox rocks 8)

Offline maraudinglizard

  • If you are not living on the edge, you are taking up to much space.
  • GTA Senior Contributor
  • ******
  • Posts: 4360
  • Real Name: Kris
Re: Umarex Colt Peacemaker .177 pellet
« Reply #4 on: March 14, 2019, 10:02:57 PM »
I have the limited edition that I had won in the GTA raffle in 2016. This one has the engraving on it. Only 100 were made, I have no. 32. It shoots bbs. I use the Honady Black Diamond bbs in it. I take it out on occasion and chase a soup can with it.

  • Northwest Florida
Crosman
1377(30+ years)
1322
2240
66
1077
2300kt.177
2400kt.177
1720T
G1 Extreme .177
Triple Threat 44R6 pistol .177
Vigilante
Venom .22
Win M14
RWS 34
Urban.22
Daisy 1000, 717, 880
Umarex Fusion .177, Gauntlet .22, CP99(bb), Airsaber(arrow slinger)
Ruger 10/22
Wildfire.177
Maxi.177
Disco.22
Prod.22
Gen 2 Mrod .25
Colt PM LE
Auto Air ll .177
S&W M&P 45 .177
P-17, QB78 .22 & .177
Benji Trail NP Pistol .177
D E Pistol .177
Sig Sauer P250.177, MCX.177, X-Five .177, P365(bb)
Kral Puncher Mega Marine .177, NP-03 .22 pistol
Rex P .357
Hatsan 25 pistol .22, 1000x .25, 135 QE .30
Carnivore .357, Hercules .30
909 and Recluse
Ataman M2R Bullpup(type 2) with DonnyFL Ronin .357/9mm
AV Nomad ll compressor

Offline Wolfer

  • Expert
  • *****
  • Posts: 1214
  • yes
  • Real Name: Mike
Re: Umarex Colt Peacemaker .177 pellet
« Reply #5 on: March 15, 2019, 06:35:14 AM »
One of my best purchases in air guns. Watch what the Dog Soilder Steve Criner does with one.     Mike
  • Dos Palos CA.

Offline splitbeing

  • Plinker
  • **
  • Posts: 241
  • yes
  • Real Name: Rion
Re: Umarex Colt Peacemaker .177 pellet
« Reply #6 on: November 03, 2020, 12:07:29 AM »
Mine shoots to the left with every pellet I try. Past the 30 day return window. Anybody else have this issue or a fix? Groups are great, just left. Getting the front sight as far right as possible before losing it In the rear sight seams about straight but takes some patience.
  • USA, PA, Pittsburgh
D48 .177 4x32 ao scope
K98 .177 open sights
R7 .177 diopter peep
Sortie (demented: semiauto removed, quiet) .177 red dot
Supercharger .22 2x pistol scope
P17
880
Flashpup .22 3-12 ao scope
Dragonfly .177 3-7x20 scope/handle (one pump to rule them all)