GTA

Air gun Entertainment and reviews => Hajimoto Productions => Topic started by: Hajimoto on November 29, 2020, 07:12:40 PM

Title: Umarex Origin: Install Strip Stak Pak
Post by: Hajimoto on November 29, 2020, 07:12:40 PM

A step by step video tutorial of how to ventilate and install the HP Air Stripper, Stand Off and Baffles.

A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. Air Stripper comes with o-ring and silicone grease for installation.
https://www.youtube.com/watch?v=KvJAYFADdHk (https://www.youtube.com/watch?v=KvJAYFADdHk)
Title: Re: Umarex Origin: Install Strip Stak Pak
Post by: ccwilder3 on February 13, 2021, 06:24:03 PM
How much does this quite the Origin compared to stock?
Title: Re: Umarex Origin: Install Strip Stak Pak
Post by: Hajimoto on February 15, 2021, 12:16:49 PM
Quote from: ccwilder3 on February 13, 2021, 06:24:03 PM
How much does this quite the Origin compared to stock?
Sorry but I do not have a laboratory with certified sound pressure meters to quantify the sound reduction but you will definitely hear a difference.
The main thing you will notice right away is the tone of the shot is lower and less reverberating.
As a reminder, baffles and air strippers do more for the airstream than just reduce sound, they reduce turbulence as well.
Less turbulence results in a smoother launch of the projectile from the muzzle.

Title: Re: Umarex Origin: Install Strip Stak Pak
Post by: ccwilder3 on February 15, 2021, 04:50:31 PM
Thanks for the reply. Would this interfere with the DonnyFL adapter and silencer?

Between the strip stak and silencer, it should really quiten the gun.
Title: Re: Umarex Origin: Install Strip Stak Pak
Post by: Hajimoto on February 17, 2021, 03:15:52 AM
Quote from: ccwilder3 on February 15, 2021, 04:50:31 PM
Thanks for the reply. Would this interfere with the DonnyFL adapter and silencer?

Between the strip stak and silencer, it should really quiten the gun.
The strip stak pak cannot be used with the DonnyFL A70 but can be used with the A50.
Title: Re: Umarex Origin: Install Strip Stak Pak
Post by: oldpro on February 19, 2021, 01:31:28 PM
 Half as loud as stock is how I would describe it.
Title: Re: Umarex Origin: Install Strip Stak Pak
Post by: bduares on April 08, 2021, 09:21:40 AM
Whatever happened to your comprehensive review of the Umarex Origin? Says it was moved to "recycle"?
Title: Re: Umarex Origin: Install Strip Stak Pak
Post by: Hajimoto on April 08, 2021, 12:17:43 PM
Quote from: bduares on April 08, 2021, 09:21:40 AM
Whatever happened to your comprehensive review of the Umarex Origin? Says it was moved to "recycle"?
Check the Grip review area


https://www.gatewaytoairguns.org/GTA/index.php?board=253.0 (https://www.gatewaytoairguns.org/GTA/index.php?board=253.0)