You can change the focus on most fixed scopes by unscrewing the front ring and then screwing the front lens in or out till you get it where you want it. I have done several cheap scopes over the years.Bob in WV
Well I took this baby apart ... it is never as easy as watching the video of the guys that have done this 100's of times ;- ) Well my 880 frame is not cut out like all the others I have seen ... a bummer for putting in the sear shim as I had to take the trigger out .. but I did it and it is a little better, but I needed more shim ... but I can live with what I did as it is about 15% better ;- )I also took out the pump and put JB Weld in the piston head .... that will dry for about 20 hrs ---- Also added the 901 Barrel sleeve ;- )I then attached GEO's LDC ...... Looks great ... you do nice work Geo ;- )And now for the bad news .... Yes the safety spring and ball went flying to China ... man alive was I &^#%&* OFF !!! THis means I will be calling Daisy Monday and ordering some springs and detents ... but I will order some more stuff too so I wont need anything else for many years if I live that long ; - ).wll
Thank you for your reply and you shooting Piranhas.... I think I’m right at the doorstep 575 FPS with 10.5 gr pellets and seven pumps is great.How many aluminum shims did you use over the JB weld fix ?Thank you again,all
Quote from: wll2506 on December 02, 2018, 05:54:08 PMThank you for your reply and you shooting Piranhas.... I think I’m right at the doorstep 575 FPS with 10.5 gr pellets and seven pumps is great.How many aluminum shims did you use over the JB weld fix ?Thank you again,allYou're very welcome. I didn't use any shims. I sanded it flat and then added a stainless steel washer behind the piston.I posted more info in one of your other threads, but maybe you missed it? Check it out here:https://www.gatewaytoairguns.org/GTA/index.php?topic=151273.msg1546715#msg1546715