Guys Im having trouble trying to figure out how to get the lower sear and spring back into the trigger group. Any link a video or pic to help me out. I didn't know you didn't have to remove the safety and bear trap lever to remove the entire trigger group when I was getting to the piston seal.
Quote from: Cliff H on October 06, 2021, 08:28:55 PM Guys Im having trouble trying to figure out how to get the lower sear and spring back into the trigger group. Any link a video or pic to help me out. I didn't know you didn't have to remove the safety and bear trap lever to remove the entire trigger group when I was getting to the piston seal.Hatsan's drawing here (zoom in to trigger group)...https://hatsanairgunsusa.com/wp-content/uploads/2018/12/Striker_Edge-Exploded_View-June2013.pdfMy animation here...https://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=7822I think there is a good youtube video of the assembly process. Will post a link if I can find it.
Mr. MikeyB,Did you ever locate the video in the Striker trigger assembly reassembly?
I believe that I have the trigger assembly put back together properly.I am puzzled by one facet of the operation of the assembly:Pulling the trigger pivots the secondary sear forward to disengage the primary sear, allowing it to drop, resulting in the release of the piston.What force actually causes the primary sear to disengage from the piston??Spring #151 force moves the primary sear up to latch the piston, but there is nothing in the trigger mechanism to move the primary sear down to disengage.The secondary sear permits this travel, but does not actively cause it........Does the tension of the piston on the piston on the primary sear cause it to disengage when the secondary sear moves out of the way??
First question would be did you trade a few emails with Willie first or just order the trigger listed on his website??https://www.woodfield-gcp.co.uk/shop/p/wwt-ii-replacement-trigger-blade
Gonna try a Welsh Willie trigger....Any tips?I have seen the video. ....
Quote from: Ronno6 on February 23, 2022, 08:29:48 AMGonna try a Welsh Willie trigger....Any tips?I have seen the video. ....Mr. Ron,I had a Striker and if I was correct in my observation, the Hatsan blade was much longer than the Crosman/Gamo blades. I noticed the video above is for a "WW HST" trigger to fit the Hatsan, but the website link shows a "WWT II" for Crosman. Are you sure the trigger you are ordering is the correct fit for your Hatsan?
In which case you know the story about the HST triggers you just bought and I won't bore you with it.
Mr. Ron,I had a Striker and if I was correct in my observation, the Hatsan blade was much longer than the Crosman/Gamo blades. I noticed the video above is for a "WW HST" trigger to fit the Hatsan, but the website link shows a "WWT II" for Crosman. Are you sure the trigger you are ordering is the correct fit for your Hatsan?
Does the HST have a two stage feel?