Thank you to our advertisers!







Author Topic: New Butt pad on an old gun...  (Read 170 times))

Offline Hoosier Daddy

  • GTA Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 21690
  • "normal" is just a setting on the clothes dryer...
  • Real Name: Scott
New Butt pad on an old gun...
« on: May 04, 2022, 10:12:20 PM »
I have a Bisly adjustable Butt pad I bought to fit on several of my guns..
Tonight I chose the Winchester 435 because the original red pad was rotten.
Here is where I start.

« Last Edit: May 04, 2022, 10:23:47 PM by Hoosier Daddy »
JimQwerty123 always said ...
"Shoot safe and have fun!"

Offline Hoosier Daddy

  • GTA Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 21690
  • "normal" is just a setting on the clothes dryer...
  • Real Name: Scott
Re: New Butt pad on an old gun...
« Reply #1 on: May 05, 2022, 07:49:37 PM »
Removed the old rotten red OEM pad..
Screw holes are off, either end... Of course.
 So I sanded down a 1/4 dowel and with some glue filled the screw holes.
BUT they were counter sunk.. so tonight I cut and glued in 3/8 dowel plugs.
« Last Edit: May 05, 2022, 07:55:03 PM by Hoosier Daddy »
JimQwerty123 always said ...
"Shoot safe and have fun!"

Offline Hoosier Daddy

  • GTA Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 21690
  • "normal" is just a setting on the clothes dryer...
  • Real Name: Scott
Re: New Butt pad on an old gun...
« Reply #2 on: May 06, 2022, 08:48:13 PM »
Sanded down the filler plugs and did a rough cut on the base plate
JimQwerty123 always said ...
"Shoot safe and have fun!"