Thank you to our advertisers!







Author Topic: Custom made Disco Forestock???  (Read 497 times))

Offline ray1377

  • Just one more airgun. What can it hurt? :)
  • Sharp Shooter
  • ****
  • Posts: 888
  • Master of the 1000 inch shot.
  • Real Name: Ray
Custom made Disco Forestock???
« on: March 22, 2021, 11:26:23 AM »
Hi All
I have removed the regular stock off my benjamin discovery and put the trigger unit / shoulder stock assembly on it off my 1322.
It shortened it a good bit and lightened it also. I really like the pistol grip feel when shooting for a free handing standing position.
My question is, have any of you ever created and or made a forestock to add to this particular setup?
Something like on a 2250 pistol or a PRod front stock piece only a little longer?
If you have any suggestions I would like to hear your input and pictures would be even better.
Thanks
Ray
  • New Albany, MS
All that is needed for evil to triumph is for good men to do nothing.

A government big enough to give you everything you want, is strong enough to take everything you have.

They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.

Offline glassman98

  • Expert
  • *****
  • Posts: 1947
  • Real Name: Craig
Re: Custom made Disco Forestock???
« Reply #1 on: March 22, 2021, 01:00:51 PM »
Ray, can you post a pic of what you have so far. I have done a lot of stocks. This what I did to my Diana Bandit pistol.  Craig



  • Apple Valley, Ca
Diana Bandit pistol
AA FTP 900
AA S510 Extra .22  ( For Sale)
Marauder .25 ( For Sale)
FWB 124 Sport 1981 ( For Sale)
FWB 124 Sport 1984 ( For Sale)
FWB 300S

Offline ray1377

  • Just one more airgun. What can it hurt? :)
  • Sharp Shooter
  • ****
  • Posts: 888
  • Master of the 1000 inch shot.
  • Real Name: Ray
Re: Custom made Disco Forestock???
« Reply #2 on: March 22, 2021, 10:13:56 PM »
Sure thing Craig. Any ideas would be appreciated for sure.
Thanks
Ray
« Last Edit: March 22, 2021, 10:17:45 PM by ray1377 »
  • New Albany, MS
All that is needed for evil to triumph is for good men to do nothing.

A government big enough to give you everything you want, is strong enough to take everything you have.

They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.

Offline Back_Roads

  • I Got A 15 Pump BB Gun :) BB Guns Got Much More Complicated :)
  • GTA Senior Contributor
  • ******
  • Posts: 11013
  • 1st Edition Crosman 760 Pump Master
    • Back_Roads Airguning
  • Real Name: James Seiler
Re: Custom made Disco Forestock???
« Reply #3 on: November 09, 2021, 04:10:13 PM »
 I'm a little late to this party, but would a P-rod foregrip, yes it will, I just went down to check  8)
 Just incase someone finds this again.
 How did this turn out BTW ???
 NM I read deeper, that was an option but longer was wanted, I too was thinking something longer and maybe with tactical mounting options for bipod etc..
« Last Edit: November 09, 2021, 04:12:55 PM by Back_Roads »
  • Wisconsin Collins Hunters Paradise" There's a Sign in Town to Prove It :)

Online Rick67

  • GTA Senior Contributor
  • ******
  • Posts: 4839
  • yes
  • Real Name: Richard
Re: Custom made Disco Forestock???
« Reply #4 on: November 09, 2021, 06:05:53 PM »
Hi All
I have removed the regular stock off my benjamin discovery and put the trigger unit / shoulder stock assembly on it off my 1322.
It shortened it a good bit and lightened it also. I really like the pistol grip feel when shooting for a free handing standing position.
My question is, have any of you ever created and or made a forestock to add to this particular setup?
Something like on a 2250 pistol or a PRod front stock piece only a little longer?
If you have any suggestions I would like to hear your input and pictures would be even better.
Thanks
Ray


The PROD forearm actually fits, but it would have that gauge hole, obviously  ;D

The OEM 22xx barrel band also fits into the band slot well—same 1/2” thickness as the PROD’s.

I don’t like plastic, so I let Steve Corcoran make me laminate forearms.

Got 4 of his to match my Vernon Austin grips—-same source of laminate blanks, which is CWP-USA.
  • Abq., NM, USA