I should have joined this forum earlier there are some great ideas and prints here!Let me show and share one of my ownIt's a 6 slug holder for a Dragon Claw .50 PCP making reloading so much faster! It's mounted on a "Hawke 11 - 22mm Adapter 137mm"Post-print settings material ABS (PLA wont work) nylon would also work. Layer height 0.1 or smaller if you can.I hope the pictures and file will show it's the first time i use the build in attachment function here The last picture shows how to cut off the 'stem' from the base making the C shaped slug holders come free. Because these will become stuck when printing and needs to be separated to make it work properly.
Both.This one worked ok but jammed up a lot. (Apparently I can't even quote this because I'm not allowed to post external links...)