gamo urban trigger up grade
Select Gate
READ GTA FORUM RULES BEFORE POSTING
GTA Forum Help Desk
GTA Announcement Gate
Dealer Area
GRIP
AirgunWeb Airgun Videos
Airgun Repository of Knowledge
Vendors and Vendor Videos
AirGun Expo 2021
Airgun Expo 2022
Contests and Giveaways!!!
Welcome New Members
In Memoriam
GTA Contributing Members
Shot Show Videos
Hajimoto Productions
Airgun Detectives
Air Gun Gate
BB Guns and Such
"Bob and Lloyds Workshop"
American/U.S. Air Gun Gates
European/Asian Air Gun Gates
PCP/CO2/HPA Air Gun Gates "The Darkside"
Air Archery
Vintage Air Gun Gate
Air Guns And Related Accessories Review Gates
Hunting Gate
Machine Shop Talk & AG Parts Machining
3D printing and files
Buyer's, Seller's & Trader's Comments
Bargain Gate
Back Room
Target Shooting Discussion Gate
Target Match Rules
Shooting Match Gates
Field Target Gates
The Long Range Club
100 Yard Match
Discussions By States
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
About
Help
Old GTA
Gallery
Search
Stats
Login
Register
Advertise Here
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
European/Asian Air Gun Gates
»
Gamo & Spanish AirGun Gate
(Moderator:
Tpatner412
) »
gamo urban trigger up grade
« previous
next »
Print
Pages:
1
[
2
]
Go Down
Share This!
Author
Topic: gamo urban trigger up grade (Read 5102 times))
avator
GTA Moderator
GTA Senior Contributor
Posts: 50202
The best "Bad Dog" I ever had.
Real Name: Bill
Re: gamo urban trigger up grade
«
Reply #20 on:
January 02, 2019, 02:13:38 PM »
Look here.... I was happy with the stock trigger on my Urban and probably could have continued using it indefinitely. But, once again, the CDT trigger is night and day difference. Making that pin the way I did took all the side to side and travel slop out of the gun. I know if you have an Urban you know what I'm talking about. Next, there is no "rub" you get from plastic on plastic. For $33 and a bit of tinkering with tools you already have around the house a marked improvement is accomplished. Plus, it kept me out of Betty Lou's hair for an hour or so.
Logged
From deep within the Rabbit Hole, Alabama
Charter Member Of The Secret Squirrel Society 20FEB202
olbill
Shooter
Posts: 63
yes
Real Name: William D. Gowen
Re: gamo urban trigger up grade
«
Reply #21 on:
March 09, 2021, 05:57:48 PM »
My CDT trigger has always had a real long travel before firing. After a couple years of laziness I took my Urban apart and used the trigger adjustment trouble shooting document from CDT to re-adjust the trigger. Here is the important part:
"Remove the GRT-4G trigger from the trigger block. Looking at the threads showing on the screw
on the opposite end of the slot, there should be approx. 1/32 of an inch of threads showing. Adjust it
to that point so that it's close."
I decided that the screw was a 3-48 and calculated that 1/32" was 1.5 turns. I turned it out till flush with the trigger and then screwed it in 1.5 turns. This made the 2nd stage close to perfect.
Logged
Decatur, GA
Print
Pages:
1
[
2
]
Go Up
« previous
next »
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
European/Asian Air Gun Gates
»
Gamo & Spanish AirGun Gate
(Moderator:
Tpatner412
) »
gamo urban trigger up grade