A Pifle--Cool!I'd cut a rear slanted angle in the front of the stock where it meets the bottle.
Eric, I suffered my first malfunction with mySentry. after a hot day of shooting at 95 degrees it suddenly failed to fire. Gauge showed 2000 psi left and all i got was "tink". I removed the mag to not double load and after 3 more attempts with "tink" I gave up. I thought maybe the heat was the issue. Two days later inside in the A/C I just tried again... "TINK"... nope.So I pumped it up to 2600psi thinking maybe MORE air pressure would help. WRONG! same out come. Seems like it is valve locked.Any suggestions?
Pump your pump until you hear the inlet valve open, then very slowly open the bleed screw just a hair. A few minutes later open it just a hair more. You want it to leak out slow enough the inlet valve doesn't shut.
Gotchya...I will post updates as they occur... unless you want me to start a new thread on it.
This is why I said I was happy to compromise on the long transfer port length.Zero drop. ~25cc plenum... but I can add all the plenum you'd want, it just makes the lower longer.
Hey guys!SA is currently in storage, as I need to find a new shop. All the plans and products are still in play, but no production can happen until I find a place I can count on to last. Anyone who is on the notification list, will be the first to know when it's up and going again. If you emailed me, you are on the list.Can't promise a date, but will say I have no intentions of giving this all up... I love this work, and have more innovations to share.
Quote from: stalwart on February 16, 2019, 10:19:53 PMHey guys!SA is currently in storage, as I need to find a new shop. All the plans and products are still in play, but no production can happen until I find a place I can count on to last. Anyone who is on the notification list, will be the first to know when it's up and going again. If you emailed me, you are on the list.Can't promise a date, but will say I have no intentions of giving this all up... I love this work, and have more innovations to share.Good news and bad . Hope you find a suitable shop space soon .
Hey guys! There are some things I have to make public knowledge, due to recent developments, and this has to be the perfect place:1. Zed R. Fatka is not currently associated, in any way, with Stalwart Arms... he does not represent us in any way.2. Any products that are copies of products we offer (even near copies), are NOT authorized by us, no matter who produces them.If any of the above changes, there will be immediate notification here.