Quote from: Bayman on May 15, 2021, 10:48:27 AMHi Hector,I've alway been intrigued by the WRS 54 peeps but never understood what keeps them them from sliding on the dovetail. I'm considering trying them on one of my Weihrauchs because it looks like a nice simple clean design and should be able to be mounted further back than my current FP-AGs . I know it's a file fit but how do you secure it to the dovetail?Thank you very much for your help RonRon;In the WGRS (Williams' Guide Grooved Receiver Sight) there are two screws underneath the elevation "ramp".These two screws press the sight upwards against the dovetail.IF you fit them well (and that means a 0.001" to 0.002" press fit), you tap the base into place with a wooden dowel and a little urethane hammer, then screw down the screws then you install the ramp insert the aperture, and you're done.The sight is so light and has so little inertia that it stays put.HTHHM
Hi Hector,I've alway been intrigued by the WRS 54 peeps but never understood what keeps them them from sliding on the dovetail. I'm considering trying them on one of my Weihrauchs because it looks like a nice simple clean design and should be able to be mounted further back than my current FP-AGs . I know it's a file fit but how do you secure it to the dovetail?Thank you very much for your help Ron