Nice write up, and that's some pretty exotic looking guns you got there Dallas!Which model Hatsan is that?
I have one also, I tried it on a lot of my air rifles and it's found a home on my DAR .22. It did a good job at muffling the bark on all of them, although it does have a bit of a tinny pitch to it compared the ones that use some sort of fabric based muffling system. What impressed me the most on the DAR is the fact it actually tightened the groups! The other thing that was a pleasant surprise was the fit, the semi-cone end cap that screws to the adapter is an almost perfect match to the OD of the DAR Shroud, it looks like it was made for this rifle... So, it's found its new home!
Paul, so that means the DAR shroud is around the same diameter as the Akela, the AUO taper also matched like it like they were made for each other.
Quote from: mrbulk on February 11, 2021, 03:26:55 PMPaul, so that means the DAR shroud is around the same diameter as the Akela, the AUO taper also matched like it like they were made for each other.It certainly does make for a very finished appearance! I really appreciate the attention to details on this one. I still have to wonder if the diameter of the inner baffles were reduced just slightly and wrapped with felt, how much of a difference it would make in the tone of the report. I'm betting it would drop the pitch a couple octaves... I like a deeper more authoritative pffft!
It certainly does make for a very finished appearance! I really appreciate the attention to details on this one. I still have to wonder if the diameter of the inner baffles were reduced just slightly and wrapped with felt, how much of a difference it would make in the tone of the report. I'm betting it would drop the pitch a couple octaves... I like a deeper more authoritative pffft!
Quote from: Rat Sniper (AKA: PaulT58) on February 11, 2021, 04:20:41 PMQuote from: mrbulk on February 11, 2021, 03:26:55 PMPaul, so that means the DAR shroud is around the same diameter as the Akela, the AUO taper also matched like it like they were made for each other.It certainly does make for a very finished appearance! I really appreciate the attention to details on this one. I still have to wonder if the diameter of the inner baffles were reduced just slightly and wrapped with felt, how much of a difference it would make in the tone of the report. I'm betting it would drop the pitch a couple octaves... I like a deeper more authoritative pffft! I cannot fully reveal what is coming in the new core (you will get one to drop in your chassis, it was designed that way so it can be continually updated by simply changing out the cores) but you will then see the design in person, and there will indeed be some type of sound dampening involved...that's all I can say.