Im wanting one…where did u purchase….good luck with it…Only place Ive found a 22 is AOA and shipping is kinda steep….Gunbroker got plenty .177….and amazon seemed sketchy….from emails with vendor
Quote from: TennX on April 08, 2022, 06:49:17 PMIm wanting one…where did u purchase….good luck with it…Only place Ive found a 22 is AOA and shipping is kinda steep….Gunbroker got plenty .177….and amazon seemed sketchy….from emails with vendori ended up buying off Amazon from a seller called NTK Outdoors. The gun was double boxed with extra cardboard padding and a fragile glass stick on the box. They also included a sample packet of pellets.
I forgot to add I love the way this cocks. This front lever is so easy and smooth. The magazines are working well and no preload needed to load. I think if I can get the trigger sorted I am going to really like this being my first bullpup.
Quote from: jjohnsonlta on April 09, 2022, 12:11:19 PMI forgot to add I love the way this cocks. This front lever is so easy and smooth. The magazines are working well and no preload needed to load. I think if I can get the trigger sorted I am going to really like this being my first bullpup.Trying to save money…waiting on Pyramyd to get them….thinking they might be easier to deal with ..if any issues…good luckI believe I read that the avenger mag will work ..if needed..just a FYI
SUCCESSI found the post on putting a ballpoint pen spring in place of the original trigger spring. I now have a 1 lb 14 oz trigger pull weight. The first stage is super light till it hits the second stage. I also just cut the spring to length instead of heating to compress down to the original length of stock spring. Stuck the cut end in the spring hole so the end not cut would be against the trigger blade.As far as first stage pull length it was mentioned something about filing some threads off the rod. Not sure but it seems to me if the rod was lengthened it would help shorten the first stage pull length? I would think this would position the trigger further back but not sure. Just pulling the pin on the small connection piece to trigger so it could be turned to lengthen would do it but I could be totally wrong in my thinking.