I'm envisioning a rattus getting taken out with an airboat.
Finally Hatsan made a good looking stock
Quote from: Nomadic Pirate on July 24, 2020, 01:59:04 PMFinally Hatsan made a good looking stock I dare you to buy 1
I apologize for bringing this back from the dead…lol. I have had one for a bit and maybe someone else is looking at one and will stumble across it. Ok, I have one in 25 caliber. It seems to be a pretty good gun but I feel the reviews maybe are a touch misleading. I would personally recommend this gun in the 177 and 22 more than the 25 due to the small air tube. If you get this in 25 expecting it to drive a 25 gr in the upper 800’s you might be a tad disappointed like I was. It will do it but the problem is that in order to do it the hammer is over driving the valve. You get no consistency just a steady drop from the beginning of the fill. This is how mine came out of the box. Will shoot near 870 at the start but by shot 10-12 you are well below 800 and mine shifts POI significantly even at 35 yards. If you don’t mind less power in 25 the gun can shine. I took 1.5 turns out of my hammer spring. Now the gun starts at like 810 and ramps up to 825-830 and has a flat spot in the shot curve and is way more efficient. This setting I feel would really shine in 22 or 177. You probably could back the spring off a bit more and still get great speed out of 18.1’s. Just some things to keep in mind if looking at this gun. Aesthetically it is a beautiful gun and can be a shooter with a little adjustment.
Quote from: Trucker3573 on April 05, 2022, 06:55:57 PMI apologize for bringing this back from the dead…lol. I have had one for a bit and maybe someone else is looking at one and will stumble across it. Ok, I have one in 25 caliber. It seems to be a pretty good gun but I feel the reviews maybe are a touch misleading. I would personally recommend this gun in the 177 and 22 more than the 25 due to the small air tube. If you get this in 25 expecting it to drive a 25 gr in the upper 800’s you might be a tad disappointed like I was. It will do it but the problem is that in order to do it the hammer is over driving the valve. You get no consistency just a steady drop from the beginning of the fill. This is how mine came out of the box. Will shoot near 870 at the start but by shot 10-12 you are well below 800 and mine shifts POI significantly even at 35 yards. If you don’t mind less power in 25 the gun can shine. I took 1.5 turns out of my hammer spring. Now the gun starts at like 810 and ramps up to 825-830 and has a flat spot in the shot curve and is way more efficient. This setting I feel would really shine in 22 or 177. You probably could back the spring off a bit more and still get great speed out of 18.1’s. Just some things to keep in mind if looking at this gun. Aesthetically it is a beautiful gun and can be a shooter with a little adjustment.Mine gets 20 shots at 880-890 with polymags and is a laser beam out to 50 yards. I was going to sell it, but its just too accurate and powerful to part with. I adjusted the set screw under the stock that goes up into the action. I assume it's a transfer port adjuster, didn't seem like it made a difference on the striker. It has a consistent 20 shot string starting right at 880 fps to about 890 for 15 shots, then drops down back to 880 by 20 and I refill. I have 2 mags, it eats to mags. Wash rinse repeat.
Quote from: Boostcreep81 on April 05, 2022, 07:10:42 PMQuote from: Trucker3573 on April 05, 2022, 06:55:57 PMI apologize for bringing this back from the dead…lol. I have had one for a bit and maybe someone else is looking at one and will stumble across it. Ok, I have one in 25 caliber. It seems to be a pretty good gun but I feel the reviews maybe are a touch misleading. I would personally recommend this gun in the 177 and 22 more than the 25 due to the small air tube. If you get this in 25 expecting it to drive a 25 gr in the upper 800’s you might be a tad disappointed like I was. It will do it but the problem is that in order to do it the hammer is over driving the valve. You get no consistency just a steady drop from the beginning of the fill. This is how mine came out of the box. Will shoot near 870 at the start but by shot 10-12 you are well below 800 and mine shifts POI significantly even at 35 yards. If you don’t mind less power in 25 the gun can shine. I took 1.5 turns out of my hammer spring. Now the gun starts at like 810 and ramps up to 825-830 and has a flat spot in the shot curve and is way more efficient. This setting I feel would really shine in 22 or 177. You probably could back the spring off a bit more and still get great speed out of 18.1’s. Just some things to keep in mind if looking at this gun. Aesthetically it is a beautiful gun and can be a shooter with a little adjustment.Mine gets 20 shots at 880-890 with polymags and is a laser beam out to 50 yards. I was going to sell it, but its just too accurate and powerful to part with. I adjusted the set screw under the stock that goes up into the action. I assume it's a transfer port adjuster, didn't seem like it made a difference on the striker. It has a consistent 20 shot string starting right at 880 fps to about 890 for 15 shots, then drops down back to 880 by 20 and I refill. I have 2 mags, it eats to mags. Wash rinse repeat.Mine does nowhere near that good tuned up high. No idea why. I don’t think the screw you are referring too is for the transfer port. I think it holds the hammer spring adjuster in place. You loosen it then you can adjust the HS tension up and down. I took 1.5 turns off my HS from stock. First shot was just under 810 and then within a cpl shots was steady in the 820-830 range. Only had time to run 9 pellets over the chrono but I was surprised how little air it used. The first cpl shots were on a pretty tight fill right at 200 bar maybe even 3000 psi. If I fill just a little less it should start right in the mid 820’s. I’m fine with it only being in the low 800’s with a 25.39 I guess. I have my avenger tuned to shoot them close to 900 so I will just use that for reaching out a tad further. Now I’m just waiting for hatsan to get a refurbished 177 barrel in stock. Would like to grab one as I have no 177 gun at all.