Fx wildcat mk1 problem with hammer
Select Gate
READ GTA FORUM RULES BEFORE POSTING
GTA Forum Help Desk
GTA Announcement Gate
Dealer Area
GRIP
AirgunWeb Airgun Videos
Airgun Repository of Knowledge
Vendors and Vendor Videos
AirGun Expo 2021
Airgun Expo 2022
Contests and Giveaways!!!
Welcome New Members
In Memoriam
GTA Contributing Members
Shot Show Videos
Hajimoto Productions
Airgun Detectives
Air Gun Gate
BB Guns and Such
"Bob and Lloyds Workshop"
American/U.S. Air Gun Gates
European/Asian Air Gun Gates
PCP/CO2/HPA Air Gun Gates "The Darkside"
Air Archery
Vintage Air Gun Gate
Air Guns And Related Accessories Review Gates
Hunting Gate
Machine Shop Talk & AG Parts Machining
3D printing and files
Buyer's, Seller's & Trader's Comments
Bargain Gate
Back Room
Target Shooting Discussion Gate
Target Match Rules
Shooting Match Gates
Field Target Gates
The Long Range Club
100 Yard Match
Discussions By States
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
About
Help
Old GTA
Gallery
Search
Stats
Login
Register
Advertise Here
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
PCP/CO2/HPA Air Gun Gates "The Darkside"
»
Fx wildcat mk1 problem with hammer
« previous
next »
Print
Pages: [
1
]
Go Down
Share This!
Author
Topic: Fx wildcat mk1 problem with hammer (Read 323 times))
Racarver
Shooter
Posts: 4
yes
Real Name: Richard
Fx wildcat mk1 problem with hammer
«
on:
March 11, 2022, 08:46:17 PM »
I purchased with a multi item trade the WC. It had issues. Former tinkering couldn't get power for 34gr pellets so he put in a bigger spring. That banged up the hammer real good, and it was rough cocking. I purchased from FX new hammer, spring, and a few other parts. Back together working fine with 25g pellets at 800 fps max. Rotated barrel, up to 825fps. Probe is set correctly. I wanted more and more consistent. Ordered a HUMA reg @135 bar. While waiting for it I continued shooting. One day it got real rough at the end of the cocking stroke. Immediately stopped and disassembled. Hammer is all beat up. Cant send photos as to new on this forum. The sear looks good, some of the dents are round so I assume the hammer is hitting the little pin on the forward stroke that pulls the hammer back when cocking. Is this possible? I dressed the hammer and indexed it to a new location, installed the new regulator and a side manometer. I am still only 825fps at 145bar. About thirty shots and it's getting rough to cock, and the big one. It fires on releasing the trigger. Tomorrow's another day, been messing with this so much my wife will start finding stuff for me to do just to have me around. I retired R&D aerospace, I would have been fired over a design like this where you take out the air tube and loose all alignment for other critical parts. Hopefully someone can help. I really like the ergonomics of this, and the accuracy is really good. Thank you in advance.
Logged
USA, NC, Murphy
Print
Pages: [
1
]
Go Up
« previous
next »
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
PCP/CO2/HPA Air Gun Gates "The Darkside"
»
Fx wildcat mk1 problem with hammer