Donation

All Springer/NP/PCP Air Gun Discussion General > American/U.S. Air Gun Gates

Ruger Airhawk parts

(1/2) > >>

Blackbird7:
I bought a Ruger Airhawk at a yardsale a couple of weeks back. The barrell was somwhat loose and I took the stock off to tighten the pivot screw. Turns out the pivot screw had snapped. Where can i get a replacement pivot screw?

Mark

Roadworthy:
Ruger is distributed by Umarex, so you could try there.  You might have better luck with Mike Melick at Flying Dragon Airguns, though.

Blackbird7:
No luck at Umarex. I emailed Mike through his website, maybe i get lucky and he has some. Thx for the help.
Mark

longhunter:
If mike doesn't have it , pyramid air stocks parts for rws 34' s . They're a direct fit. Or, go down to the hardware store and match it up to a grade 10 button head Allen. Don't worry if the bolt doesn't have a long shoulder. It will be encased in the pivot tube, so, it won't wear on the breech block. Just grease the threads before you reassemble.

Blackbird7:
Oh, cool. Thanks! Will check there next but like the hardware store back up!

Navigation

[0] Message Index

[#] Next page