Donation

All Springer/NP/PCP Air Gun Discussion General > Machine Shop Talk & AG Parts Machining

I think I broke it.... How to rebuild my G1???

<< < (6/6)

pindog2000:
i would send it to ed(shadow)

Rocker1:
 I have used most everything from a parts washer at work to soap and water in the sink, I got into a lot of trouble with the wife over that.  Just get it clean and don't get carried away with the lube.THANKS DAVID

Springer25:

--- Quote from: pindog2000 on July 20, 2010, 03:45:57 AM ---i would send it to ed(shadow)

--- End quote ---

why?  it takes all the fun out of it!  you can't learn if you don't try.  plus i already have all the parts except the  delrin spring guide which paypal is supposed to clear the money and I Need to send payment.  

Rocker1 LMBO..  yea I am going to pick up some of that denatured alcohol.  sounds like the trick.

I have a lubing question I was going to use a light coat of clear on the compression tube OD.  On pyramid air it says to use Moly on the sides of the seal?  What do you guys do?

Pete:
Hi..
lubeing the ID of the tube is a trick...yer can't lube it before yer put the
piston in or yer end up with all the lube in front of the seal...
Put moly on the side of the seal and around the rear of the piston..
Then what I do is give the piston centre section a  light spray
of silicone high tack chain lube..It dosn't take long for it to get thown
onto the tube..
PS..don't worry about the spring lube..theres some with the guides...


Pete

Springer25:

--- Quote from: pete on July 21, 2010, 12:24:44 AM ---Hi..
lubeing the ID of the tube is a trick...yer can't lube it before yer put the
piston in or yer end up with all the lube in front of the seal...
Put moly on the side of the seal and around the rear of the piston..
Then what I do is give the piston centre section a  light spray
of silicone high tack chain lube..It dosn't take long for it to get thown
onto the tube..
PS..don't worry about the spring lube..theres some with the guides...


Pete


--- End quote ---

Ahh I see... I will do that when I reassemble, thanx pete

Navigation

[0] Message Index

[*] Previous page