Donation

All Springer/NP/PCP Air Gun Discussion General > American/U.S. Air Gun Gates

Crosman 180 and 400 bulk fill?

(1/3) > >>

JayDee24ca:
I have  nice examples of both these guns, and have been wondering if it is possible to bulk fill them. If so, what would I be required to do? I do not want a tethered gun, but a true bulk fill. Has anyone here done this to these rifles?

OTmachine:
You could just add a drop block and a HPA tank regulated @ 850 psi.  Or buy or make a new pressure tube end cap to accommodate bulk fill CO2.

See this: https://www.airgundepot.com/air-venturi-co2-bulk-fill-adapter.html

TerryM:
I converted a 180 to bulk fill using a tube extension from Mac1 and a fill cap from Brian and Associates. B&A is no longer around, I don't know about Mac1. The extension is 8”.  Gun holds about 50 grams of CO2.  The extra barrel band is one made for a QB.  Had an old Weaver J4 on when this picture was taken, now have a Nikon 4x32 on it.

OTmachine:
Nice rifle! Flying Dragon had done up a  Xisico XS60C  like that for HPA.

JayDee24ca:
I guess what I really want to know is if there is any valve modification needed. I have a couple of bulk fill adapters I got from Bakers a while ago that I was planning to use on my Disco and maybe on a Cr150. On the rifle that has had a tube extension added to it, how is the tube attached? Was it welded in, or threaded?
JD

Navigation

[0] Message Index

[#] Next page