Donation

All Springer/NP/PCP Air Gun Discussion General > Gamo & Spanish AirGun Gate

Can't get my Gamo Hunter 220 to catch

(1/4) > >>

Randino:
When I break the barrel, it goes all the way down but doesn't catch. Any ideas what is broke and how to fix it? I don't have a spring compressor so I wasn't able to break it down further.

Randino:
Second picture

Roadworthy:
If you've played with the trigger adjustments start by backing off any changes you've made.

Randino:
The trigger hasn't been adjusted, this happened after a shot. Fired it, went to cock it and it wouldn't catch. The trigger has been in it most of its life, so this wasn't a bad install job.

Thank you for the idea though, I'm stumped, so it's all appreciated.

Roadworthy:
You could try backing off the trigger adjustment by one complete turn anyhow - just to see.  You might also be sure the anti beartrap linkage is moving freely and its return spring is in place.  Its purpose is to prevent the trigger from being pulled when the action is open but if it is preventing the trigger from moving forward during cocking the gun will not cock.  Just a thought.

Navigation

[0] Message Index

[#] Next page