Donation

All Springer/NP/PCP Air Gun Discussion General > Air Gun Gate

Spring Compressor

(1/3) > >>

Exstudjr:
I know I will need a spring comprssor for tuning my Titan Gp. What type should I get and where can I get it from? Is there a way to make one? I searched this forum and could not find an answer.

ezman604:
First of all, welcome to GTA Forums. Glad you found us and joined up. There's a wealth of information here and a LOT of very knowledgable and helpful folks. First place to check would be the Library section. There you can click on several links. Under "Tips and Tricks" you will find Randy's Spring Compressor. Under "Projects" check out CDT Spring Compressor.
I bought mine from a fellow on the Yellow, sort of a Yellow fellow. :)
It is a VERY good compressor that has served me well and I've disassembled many a gun with it. Check it out here...

http://www.network54.com/Forum/79574/message/1243024986/For+Sale-+Spring+Compressor

Be sure to post any questions or concerns and your progress with your home tune project.
Again welcome and....
Happy Shooting!!!!
 8)

targetdriver:
Here's mine http://www.lowes.com/pd_24813-1073-KR3.540_0_?productId=3054785&Ntt=bessey&Ntk=i_products&pl=1&currentURL=/pl__0__s?Ntk=i_products$rpp=15$No=30$Ntt=bessey$identifier=

It works like a charm! Purchased @ any Lowes. You could probably get by with the 36", but I went with the 40" just for any job.



Mike

ezman604:
Unless you have some form of securing the gun TO that clamp, you're asking for a disaster. You have GOT to control the gun as well as the spring when disassembling. Get ready for a barrage of replies...
SAFETY first!!!!

targetdriver:
A belt put snugly around the rifle make it nice and secure. Never had a problem in any tunes that I've done with it. A belt is a must.....thanks for mentioning that!

Mike

Navigation

[0] Message Index

[#] Next page