Donation

Target Shooting Matches, Discussion & Events > WFTF Class Field Target

WFTF piston for 2019

(1/4) > >>

Scotchmo:
I'm getting ready for next year with a little more emphasis on WFTF. Though I still plan on shooting in Hunter and Open some times.

I've made too many changes at times and then it's harder to evaluate what is actually helping. So I'm taking it a step at a time. OK - a couple steps at a time.

After the recent 2018 National match, the first thing I did was shorten the gun about 3" so that it would fit in a case that is legal on all airlines as checked baggage. I will be flying to a match at least one time next year. My rig was at 12 lbs originally, which is a good compromise for a 12fpe piston gun. I lost about 1 lb off the end of the muzzle when I shortened it and decided that the resulting 11 lb total weight was too low. I shot it just little bit that way. Lighter weight makes a piston gun harder to control and it's harder on scopes. I've seen piston FT guns weighing a lot more so I decided to add some extra weight during process. First I added an Anschutz style rail. The rail addition adds nothing by itself, but it gives me a convenient way to add other weights and accessories to test out.





The C-channel added about 4.2lb. and the ram mount about 1.5 lb. bringing the total to about 17 lb. I can swing the Ram mount forward and rest the flat channel on my knee for most shots, same way as I shot before. If I need some extra elevation for high angles or obscured targets, I can extend the hamster a few inches. That might also help on standing and kneeling shots.



Our club had an FT match in Cambria last Sunday. I tried the QB58 with just the C-channel (no hamster). I was also testing a new scope with higher mounts and new dope. I got the same score as I did the last time I shot in the old configuration on that same course. So far, so good. I'll add the hamster into the mix for the next match.

Calmark:
This is a good time prior to the 2019 FT season to be testing out physical changes to and new techniques relating to your spring gun and scope. 

The Anschutz type rail will be very handy to easy application and removal of accessories such as the hamster.  I've often thought it would be nice to have one on my HW97, TX200 and other piston guns to add versatility like yours now has. 

It will bring big peace of mind to minimize a loss of your QB58 while flying now that you can have it with you on the plane while traveling.  Shortening it was a good move and you have plenty of time to get the weight and balance figured out. 

I really do think the hamster will prove to be helpful, especially if you need extra height on targets at a steep incline.  I have a similar RAM mount screwed onto the stock of my TX and I think it has been an advantage when shooting offhand and not just while seated.  Let us know how the extra weight of the C-channel and hamster help or hinder shooting in future matches.  I predict you'll find an increase in scores once you adapt to the new add-ons.  ;D

 

Scotchmo:

--- Quote from: Calmark on November 27, 2018, 10:08:34 PM ---This is a good time prior to the 2019 FT season to be testing out physical changes to and new techniques relating to your spring gun and scope....


--- End quote ---

I plan on spending the next two months doing just that.

I ordered a bunch of steel and aluminum including an aluminum channel identical to the steel piece. I'm going to try adding a carry handle so that I won't need a case or gun caddy to tote the gun between lanes. And also looking at adding a butt-hook/butt-weight. All parts can be swapped for aluminum or steel to experiment with the weight/balance. Once fully configured, overall weight can be easily varied between 16lbs and 24lbs total. With weight distributed as needed.

Calmark:
I've wanted to experiment with butt hooks during this off season to see if I can add some more stability while shooting wftf.  I've also thought of adding weight to the rear of a wftf gun to see how it would handle.  I have a Weihrauch HW55 target rifle somebody poured roughly a pound of lead into a hollowed out section of the butt stock.  Coupled with the ~1lb barrel sleeve, it makes for terrific balance and helps absorb recoil of course.

I'm going to bet your gun will be much less affected by recoil at the 24lb mark.  That weight might be worth putting up with if the addition of a hamster, butt hook and getting the balance right allows it to be usable in the forced position lanes.  It occured to me you can also make a new barrel weight that is longer than you currently have and slide it farther back on the barrel.  That might change harmonics, poi, etc, but is another option to add weight up front if desired.

I'm on the lookout for a QB58 for modifying as well this winter and have using it in mind for some fun in FT next season.  Its a nice compact, side lever with sliding compression tube that allows direct loading of pellets like I prefer.  It also lends itself well to experimentation since the basic gun tends to cost under $100.

Scotchmo:

--- Quote from: Calmark on November 28, 2018, 12:08:20 AM ---...It occured to me you can also make a new barrel weight that is longer than you currently have and slide it farther back on the barrel.  That might change harmonics, poi, etc, but is another option to add weight up front if desired....


--- End quote ---

I was going to do that when I shortened the gun. I was going to remove it and bore it out deeper, then slide it on farther. But I had used a bunch of loc-tite and setcrews when I last installed that weight. I has not moved in years. I tried getting it off with a heat gun. It was not budging, so decided to just lop a couple inches from the weight instead.

Navigation

[0] Message Index

[#] Next page