Hatsan 95 recoil stop plate screw torque?
Select Gate
READ GTA FORUM RULES BEFORE POSTING
GTA Forum Help Desk
GTA Announcement Gate
Dealer Area
GRIP
AirgunWeb Airgun Videos
Airgun Repository of Knowledge
Vendors and Vendor Videos
AirGun Expo 2021
Airgun Expo 2022
Contests and Giveaways!!!
Welcome New Members
In Memoriam
GTA Contributing Members
Shot Show Videos
Hajimoto Productions
Airgun Detectives
Air Gun Gate
BB Guns and Such
"Bob and Lloyds Workshop"
American/U.S. Air Gun Gates
European/Asian Air Gun Gates
PCP/CO2/HPA Air Gun Gates "The Darkside"
Air Archery
Vintage Air Gun Gate
Air Guns And Related Accessories Review Gates
Hunting Gate
Machine Shop Talk & AG Parts Machining
3D printing and files
Buyer's, Seller's & Trader's Comments
Bargain Gate
Back Room
Target Shooting Discussion Gate
Target Match Rules
Shooting Match Gates
Field Target Gates
The Long Range Club
100 Yard Match
Discussions By States
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
About
Help
Old GTA
Gallery
Search
Stats
Login
Register
Advertise Here
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
European/Asian Air Gun Gates
»
Turkish AirGun Gate
(Moderators:
Rocker1
,
ezman604
,
GTA-Airgunner
) »
Hatsan 95 recoil stop plate screw torque?
« previous
next »
Print
Pages: [
1
]
Go Down
Share This!
Author
Topic: Hatsan 95 recoil stop plate screw torque? (Read 335 times))
Jay308
Plinker
Posts: 126
yes
Real Name: Jay
Hatsan 95 recoil stop plate screw torque?
«
on:
July 27, 2022, 06:28:54 PM »
The recoil stop plate flew off today and I’m going to put blue loctite on the screws, but I’m not sure on the torque spec of the screws. Thanks
Logged
USA, NC, Raleigh
SteveP-52
I just lurk, I'm no longer a
GTA Senior Contributor
Posts: 8002
Real Name: Steve
Re: Hatsan 95 recoil stop plate screw torque?
«
Reply #1 on:
July 27, 2022, 09:52:29 PM »
Not sure there is one but I've also honestly never looked. Clean both the screw holes and screws with alcohol to get and grease and gunk off and out, dab of Blue Loctite or Vibra Tite VC-3 on the threads and then just screw themed them in tight by hand and let set overnight.
Logged
NY, USA
Jay308
Plinker
Posts: 126
yes
Real Name: Jay
Re: Hatsan 95 recoil stop plate screw torque?
«
Reply #2 on:
July 27, 2022, 11:07:27 PM »
Thanks, I will just snug them up by hand.
I ordered the Hawke 2 piece 1” offset rings, based off your other posts and I will move the plate to the front holes.
I planned on 30 in/lbs for ring bases and 15 in/lbs for the ring caps with purple loctite.
Logged
USA, NC, Raleigh
Jay308
Plinker
Posts: 126
yes
Real Name: Jay
Re: Hatsan 95 recoil stop plate screw torque?
«
Reply #3 on:
August 14, 2022, 06:58:23 PM »
I hand tightened the screws with blue loctite, I slid the recoil stop back and snugged the screws and then gave it about 1/8 turn. I believe if you used a torque driver it would not end very well. So, thanks for the advice.
Logged
USA, NC, Raleigh
Print
Pages: [
1
]
Go Up
« previous
next »
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
European/Asian Air Gun Gates
»
Turkish AirGun Gate
(Moderators:
Rocker1
,
ezman604
,
GTA-Airgunner
) »
Hatsan 95 recoil stop plate screw torque?