I'd hog out the gauge block or get a hill are you going to regulate it ?
If you get the Huma external regulator tester and their quickfill gauge you could just extend the spacer tube and delete the stock gauge entirely. If you're chasing max plenum volume that would be the best route.
I understand that the gauge block is shorter as well. Would you lease post If you have the part number for the gauge block?
I wanted to tune this one for 50-55FPE w/34g JSB, so needed a little bigger plenum, without eating into the air res. Aluminum tubed that will go in a Turkish Walnut stock.
Yeah I mean an external plenum works but that kind of defeats the purpose of the SAM valve mod too... like if you're strapping a bottle to the outside of the gun anyway then 8cc from a shorter valve isn't that big a deal. I'm just talking about max plenum volume in a stock package.
The field target air tube is 2 inches longer than standard mrod, I'm pretty sure that the SAM is also.This tube should fit the Turkish Walnut stock, right?Hunter
Quote from: FuzzyGrub on January 17, 2022, 09:25:00 AMI wanted to tune this one for 50-55FPE w/34g JSB, so needed a little bigger plenum, without eating into the air res. Aluminum tubed that will go in a Turkish Walnut stock. Quote from: CableStop on January 16, 2022, 11:06:47 PMYeah I mean an external plenum works but that kind of defeats the purpose of the SAM valve mod too... like if you're strapping a bottle to the outside of the gun anyway then 8cc from a shorter valve isn't that big a deal. I'm just talking about max plenum volume in a stock package.The sam valve inside a non-sam is not a 'stock package' technically. 8 cc from a shorter valve for me would be a lot even with my already present 53 cc's of volume, I'd take another 15% increase, sadly I cannot as this won't work in my 'stock package', without additional parts...I see no point removing the gauge on a gun, how many cc's would that even provide? I was just poking fun in how backwards your thinking was anyhow...I am not familiar with people removing pressure gauges to gain 1-2 cc.