1
Welcome New Members / Re: newbie« Last post by amb5500c on Today at 01:21:26 AM »Welcome to the GTA.
Richard 2
Welcome New Members / Re: Sa10« Last post by amb5500c on Today at 01:20:59 AM »Welcome to the GTA.
Richard 3
Welcome New Members / Re: Hello Elapid--<« Last post by amb5500c on Today at 01:20:29 AM »Welcome to the GTA.
Richard 4
Welcome New Members / Re: Introduction« Last post by amb5500c on Today at 01:19:06 AM »Welcome to the GTA.
Richard 5
Welcome New Members / Re: Noob« Last post by amb5500c on Today at 01:18:22 AM »Welcome to the GTA.
Richard 6
Welcome New Members / Re: First introduction post« Last post by amb5500c on Today at 01:16:20 AM »Welcome to the GTA.
Richard 7
Back Room / Re: Silver« Last post by Wayne52 on Today at 01:12:35 AM »Jim I bought a roll of silver eagle's in 2015, I've also got a lot of sterling silver that I found metal detecting, it's a 1/2 gallon jug full of it. I've also got a lot of silver coins on top of that that I found metal detecting.
8
Vintage Air Gun Gate / Re: Crosman 1400 weird air leak« Last post by Volvoguy on Today at 01:02:24 AM »Alsoo, would anyoone know the size of the quad ring and where to order them in bulk? I measured mine and have close matches but I want to make sure.
9
German AirGun Gate / Re: Questions on New to Me Diana 56TH .177« Last post by Roadworthy on Today at 12:53:37 AM »Having to fuss with it while cocking coupled with the low power tells me you MAY have a broken spring. The gun should normally run 16 to 18 FPE. The slight buzz is not abnormal but a tune should have eliminated it if the gun has been tuned (doubtful). The manufacture date is usually on the left side of the action just above the stock. If it's not there you can contact Diana in Germany with the serial number. They can probably tell you the manufacture date.
10
PCP/CO2/HPA Air Gun Gates "The Darkside" / Help with talon ss shooting slow and reg setup« Last post by 22Talon on Today at 12:39:21 AM »Needing help from any talon experts here.
Ok I have been trying to get my Talon SS back in order and got an altaros reg, hammer, breech, new seals etc from talon tunes. Putting it together was a bit of a pain as its the first gen so a lot of stuff is a bit different and not much guides for it. Anyway it shoots, very consistent but at max power wheel of 12 and top had open to full 2.5 turns, velocity is only 690 with jsb 18 grn pellets which to me seems slow . Reg is set at 150 bar, wondering if that is too high and causing top hat to close to fast? Do i need to lower reg down a bit maybe? Also how can i empty tank fast without damging reg? Altaros said shoot the gun empty but that would take a long time. The only other thing i noticed is the new plastic male screw part of the power wheel is a lot shorter than the old style originally on the gun(needed repayment as it cracked when I stripped the original screw years ago) could that casue it? Maybe get a stronger and longer spring? Im hoping the reg still let's me get orignal power of 25 or so fpe of possible. |