Donation

All Springer/NP/PCP Air Gun Discussion General > Gamo & Spanish AirGun Gate

ALERT-----GAMO AND THE NEW TWO CROSS PIN ACTION- and the effect on the GRT-4G

<< < (2/2)

OleTomCat:
The Silent Cat is an older design that was around before the new two pin design.  I am sure that when they run out of the old stock parts the newer ones will have the two pins.

N6CRV:
Hello, what I made to use as a spring compressor and worked really good. Is a clamp used for wood. It is the kind that you screw onto 3/4" pipe and can make it any size you need it. One end has a screw clamp and the other end you slid up or down the pipe to what you want to clamp. I covered my pipe with tape as I did not want to scratch my gun. You lay the action on the pipe then I use a hose clamp around the barrel after I put tape where I want the clamp. Then just slide it up to the end with the screw and compress the spring. I have had to put a socket in front of the screw clamp if it was to large to fit into the spring tube. Works good and you can use it for wood working.
Don

Navigation

[0] Message Index

[*] Previous page