Donation

All Springer/NP/PCP Air Gun Discussion General > Wood Chop Shop (Working with wood)

New Butt pad on an old gun...

(1/1)

Hoosier Daddy:
I have a Bisly adjustable Butt pad I bought to fit on several of my guns..
Tonight I chose the Winchester 435 because the original red pad was rotten.
Here is where I start.

Hoosier Daddy:
Removed the old rotten red OEM pad..
Screw holes are off, either end... Of course.
 So I sanded down a 1/4 dowel and with some glue filled the screw holes.
BUT they were counter sunk.. so tonight I cut and glued in 3/8 dowel plugs.

Hoosier Daddy:
Sanded down the filler plugs and did a rough cut on the base plate

Navigation

[0] Message Index