Thanks I tried looking in there and it seems its pretty dead. With posts being over a year old.Was hoping there were some talon guys here or maybe a write of the talons and differences of models and such.I got the reg installed and set to 150 but am only getting like 680fps with jsb at max hammer and top had settings. So not sure what the problem is. Bad valve? Bad top had? Not strong enough spring or hammer?
I did send him some emails but he never responded. The impression i get from him and from what i got when looking at getting the stuff originally is that he makes good things but is not the best at replying being busy and also not being the most friendly person.
Wait am i doing it backwards??I thought more psi on the reg meant more power? Did I miss something?Draining the reg is a pain i think. Stock i just put a nut in the fill probe by tophat and screwed in and drained it.With the reg i dont know if i can do that or if it would damage since it says to only fill from the new fill port on the reg. Altaros said to shoot the gun dry but that is a lot of shooting.I tell you what though, filling that sucker from empty sure made me wish i had a scuba tank. I think it was like 400 pumps to get to 200 bar. Many breaks and time to cool were needed
Reg adjustment is internal. So have to drain the tank(not sure with reg i can drain like how i did without) and then take valve off to adjust. Re assemble and then refill tank.
I thought id try the reg to give consistency since before the Talon lacked that and seemed to be a problem at the time.Maybe the talon tunes hammer and ifni get upgraded spring it would be enough.If i had the options we have back then I would not have bought it. Sure you can mod the heck out of it but that adds up in cost fast and you could probably buy a taipan or something for the cost.Out of the box its work to get it shooting compared to other guns. I am shocked they are selling for 700 bucks. Lots of good guns at that point or cheaper.