I spoke to Swede (Al), and he liked my procedure.I removed all burs today. Some caused by the pellet pins breaking in and seating to the mold. Once complete, I polished each cavity\ using medical cotton swab tips, loaded with polish. Sadly, is was out of flitx. My go to polish for such things. Not fully morrow polishes as I would have gotten from Flitz, but close enough as the pellets were dropping clean, with no skirt issues what so ever. Once again, ran test at 36 yards. Groups were all much tighter than last test.Using 1' target dots, all pellets went inside the dots. A far cry for first cast that I couldn't hit the dots at all , with up to 5-6" Groups.Did have one odd target. First 5 in dot, then 4 2" right, in a good cluster, then the last two in the dot again. Odd, no Idea why such a good cluster, off target, for four in a row. So far, getting better still! Knife[/size][size=78%] [/size]