1
Welcome New Members / Re: New to air rifles« Last post by Habanero69er on Today at 07:17:41 AM »Welcome to the GTA Seth.
2
Welcome New Members / Re: Hi, i'm Daniel with Striker Edge« Last post by Habanero69er on Today at 07:16:49 AM »Welcome to the GTA Daniel.
3
PCP/CO2/HPA Air Gun Gates "The Darkside" / Re: FX Impact M3 Power Adjustments« Last post by GSu on Today at 05:56:43 AM »Yes you can increase the #2 regulator pressure without issue. Just be sure to turn counter clock wise in tiny increments. It will take a number of shots for the gun to equalize to the new settings. FX regulators can be turned down but again very tiny increments. Make one adjustment and shoot 5-10 shots and continue and see where you end up. The Huma regulators need to be reduced after the airgun is completely emptied. They will fail ( leak badly) if you reduce the settings while pressurized.
4
Back Room / Re: Real life heroes of the silver screen« Last post by hallwoo on Today at 01:37:12 AM »5
Back Room / Re: Real life heroes of the silver screen« Last post by hallwoo on Today at 01:22:48 AM »10
PCP/CO2/HPA Air Gun Gates "The Darkside" / Re: New 3622 big problems« Last post by Diananike on Today at 12:28:33 AM »Try every trick, like silicon oil drops to the AG’s fill port. Good call I thought of soaking the valve in some silicon oil too! I’ll try that overnight Then try the mallet tap while pumping. It’s worth a shot. I’m definitely learning some PCP lore with this gun. My only other PCP is a PP800R pistol in .25 that I got in 2022 and have had 0 issues with. It took some chrony work to figure out the regulator. And it’s definitely more accurate in a certain pressure range. I thought the new Crosman would be a perfect intro to a moderately powered garage plinker. It’s pretty frustrating but I won’t give up on it yet. |