1
Crosman-Benjamin Air Gun Gate / Re: Extended Pump 1322« Last post by Van on Today at 03:52:52 PM » Peter, thanks for the Marauder valve stem tip. I never thought about that. I do have some of those as my Disco tube builds use.them in the custom valves from Magnum Airpower. If I remember right the 66 tube is 14 " long so it's about 3" shorter than a 2200 and 1- 1/4" longer than a 1377. The walnut stock was a shaped but not inlet one I ordered from Numrich when they had some factory seconds. I inlet it and cut the pump arm the correct length.
2
Air Gun Gate / Re: What airgun related did you do today?« Last post by Matchstickshooter on Today at 03:21:06 PM » Dug out the all metal rear sight that came clamped to the dovetail of my old Chinese B3.
It sat crooked on the dovetail, so I ended up with a scope. Reworked it. it was the side bolt through/clamp that was off centered a bit . Made the bolt hole a bit bigger, and did some filing on the clamp. Now it sits straight, and can be used for another project. 3
Machine Shop Talk & AG Parts Machining / Re: oring internal to barrel or on bolt?« Last post by Rick67 on Today at 03:06:34 PM ».22 caliber.
4
Machine Shop Talk & AG Parts Machining / Re: oring internal to barrel or on bolt?« Last post by Rick67 on Today at 03:04:57 PM »It’s almost a drop-in ‘cuz all you have to do is increase the “acreage” on the 2 flat spots for the breech screws, aka file it.
Very accurate 👍 5
Bargain Gate / Re: Refurb Sale at Pyramyd -- 20% off« Last post by mobilemail on Today at 03:02:36 PM »Shame none of the S510 series are available as refurbs. Actually, probably good for me....
6
Welcome New Members / Re: Hello« Last post by Habanero69er on Today at 02:55:26 PM »Welcome to the GTA Stergios.
7
Machine Shop Talk & AG Parts Machining / Re: oring internal to barrel or on bolt?« Last post by eeler1 on Today at 02:54:48 PM »So you did something similar to your PRod? Caliber? How'd it turn out?
I got turned on to 20 cal for pcp guns by Scott S (Motorhead), who has had good results with similar conversions. I did a 20 cal conversion on a MRod using a Weirauch barrel a while back, and it turned out really well, lots of shots and super accurate. Don't know why more people don't try 20 cal, I guess the bigger pellets have everyone under spell. I tried Krale for a 20 cal LW barrel, but it would have been a long wait for an expensive barrel, like 200Euros. The Air Force barrels were too short for what I wanted, and still pricey. So I went to Air Venturi and got a barrel by Beeman (actually made by Weirauch according to pyramid air). 22 inches choked. Although I had to cut about 3 inches of a larger diameter off at the breech end in order to fit the receiver, so it's 18-19 inches long now. Still kinda pricey at a little over $200, but I couldn't find any other 20 cal barrel available. Plus this one comes with a shroud that has essentially the same OD as the original PRod shroud. Turns out the Weirauch shroud is threaded at 18mm-1.0mm, while the PRod shroud is 11/16-24, which by chance are compatible with each other. Right now I'm at the decision point for the barrel v bolt oring. 8
Back Room / Re: Got jokes? Post 'em here« Last post by Habanero69er on Today at 02:53:03 PM »That’s funny. I don’t remember ever seeing that one. Unibrow & all. 😂
9
Hunting Gate / Re: #6 rattus for this year« Last post by ranchibi on Today at 02:42:05 PM »Great shooting as usual Randall! Glad to see you have a decent supply of rats. HARRY! LOL....I will surely add some red fingernail polish the next time a rat doesn't want to give up it's blood...😂....thank you so much! 10
Back Room / Re: Our Outside Cat ... got stoned & went Bug hunting« Last post by TennX on Today at 02:37:49 PM » My dog ginger (RIP) loved fresh cicada’s….she wouldnt eat dead ones….lol…good luck
|