Donation

All Springer/NP/PCP Air Gun Discussion General > Czech & Russian Air Guns

Slavia 630 rear trigger guard screw

(1/2) > >>

CZshooter:
Anyone know of a source for the rear trigger screw... and spare piston seals as well?  I called CZ (USA) and they have nothing available.
Thanks!
Danny

subscriber:
Danny,

There are some posts about Slavia seals on this forum.

I found some of them, but have not exhausted the search:
https://www.gatewaytoairguns.org/GTA/index.php?topic=131220.0
www.airrifleheadquarters.com/catalog/item/251485/43077.htm

https://www.afg-defense.eu/piston-seal-slavia-634/

As for a bolt, if you run out of options, you may have to contact these guys:
https://www.afg-defense.eu/air-guns-perun-734-cal.-4.5-mm/

Or custom make a bolt from a nail...

Parts for Slavia and Perun:
https://www.afg-defense.eu/product-result/trigger%20for%20slavia/

Ask them:  https://www.afg-defense.eu/contact/#predajna

SteveP-52:
You might have a look at TW Chambers. They carry spare parts for a few of the CZ guns. Not a clue if some use the same parts but you might get lucky:

https://www.gunspares.co.uk/categories/24058/Slavia/

Slavia:
A personal foible of mine is that I like socket head screws on all my guns.  I just took a glance at my 631, and sure enough - at some point in the past I had replaced that rear mounting screw with a black alloy socket head cap screw.  That means I got the screw at the local hardware store.  Take yours to the store and I'll bet you can match it.  I don't mean a home improvement store, where they only have a few SAE sizes in poly bags.  I mean a real hardware store, where they have little drawers full of stuff, both SAE and metric.

That screw is the same for both the 630 and 631.

subscriber:
From Steve's link:  https://www.gunspares.co.uk/products/24502/630/

Rear guard screw is part number B1592

Navigation

[0] Message Index

[#] Next page