WoW, I expected the Walter Falcon hunter to be the same as the 125 inside. Piston is different, the 125 does not have a spring guide inside the piston and the end cap on the 125 is much longer and has 3 pins.
. there is already the mod someone used with those two brass well pipe caps, but i don't know if i like it, i want the contour of the rams arm to match what its seated against something with a divit to pivit lol
Mike,Can you give me an outside diameter of the Receiver Tube and the length of the Receiver Tube ?Also, a weight of the stock by itself and the weight of the assembled rifle ?I want to compare it to the 135 when I can get that info.Thanks !Dave
Quote from: Mike 4888blues on April 13, 2012, 11:24:06 PM. there is already the mod someone used with those two brass well pipe caps, but i don't know if i like it, i want the contour of the rams arm to match what its seated against something with a divit to pivit lolMike,Were those the "PEX Plugs" ?Dave
Quote from: Craymar on April 13, 2012, 11:48:10 PMWoW, I expected the Walter Falcon hunter to be the same as the 125 inside. Piston is different, the 125 does not have a spring guide inside the piston and the end cap on the 125 is much longer and has 3 pins. Mike's WFH is not a QUATTRO trigger model . . . That may make a difference ?I'd like to document any difference between "Hatsan" brand rifles, versus, "Walther" branded rifles . . .DaveDave
the outside diameter of the receiver tube is 32.94 mm/ measured at the receivers cocking shoe inlet . the receivers total length is 17'' . the weight of the stock is 2.lbs.02 the rifle weight reassembled less my complete trigger assembly, safety,and trigger guard and its two screws is 7lbs 9 oz[/color][/b] :
Mike, I think ya forgot the "n" on "whitefang's" name. LOL
Quote from: Lambchops on April 14, 2012, 01:09:15 AMMike, I think ya forgot the "n" on "whitefang's" name. LOLlol hi lamchops i adjusted it lol and even gave him a little color with a slant hey my friend did you notice i went johnny cash black now no more colors from now on lol except a tid bit at times .
ok all the other pieces weigh 6 oz .2
the weight of the stock is 2.lbs.02
Quote from: Mike 4888blues on April 14, 2012, 12:32:39 AM the weight of the stock is 2.lbs.02Mike,Is that 2.02 lb, 2.2 lb, or 2 lb, 2 oz ?Thanks,Dave
Quote from: Mike 4888blues on April 14, 2012, 01:57:47 AMQuote from: Lambchops on April 14, 2012, 01:09:15 AMMike, I think ya forgot the "n" on "whitefang's" name. LOLlol hi lamchops i adjusted it lol and even gave him a little color with a slant hey my friend did you notice i went johnny cash black now no more colors from now on lol except a tid bit at times .No it's cool man, forget about it. Use whatever colors you like bro. I'm okay with it.