Yes Douglas .... Throat changed from .280 and all the parts fabricated.
Do put up a pic or three, and how it shoots. Always love seeing another Bottle 'Rod in action. I am re-barreling my .25 with an LW polygon, and would be quite interested in a valve that does not need as big a spring as I can fit in. cheers,Douglas
Looking good Scott, but I can't see how you would be adjusting the spring tension once the gun is fully assembled.
Quote from: PakProtector on January 11, 2020, 06:48:57 AMDo put up a pic or three, and how it shoots. Always love seeing another Bottle 'Rod in action. I am re-barreling my .25 with an LW polygon, and would be quite interested in a valve that does not need as big a spring as I can fit in. cheers,Douglas Let me know how your polygon shoots I’ve had no luck at all with them unless I put a monster choke on them so I stopped using them.
Quote from: triggertreat on January 11, 2020, 05:53:54 PMLooking good Scott, but I can't see how you would be adjusting the spring tension once the gun is fully assembled.This version is a take it out and play with it ... once set install and forget about it. * M-rod is a BOTTLE conversion using an adjustable output regulator, should provide plenty of speed adjustment.If it creates an issue redoing with an External SSG is easy enough and a painless alternative. Again .. this is just R&D and nothing is ever cast in stone
I don’t know how I missed this one. I have struggled with the drilling of the stem on the last two I built and that in turn had negative effects on performance . I just couldn’t get a big enough hole to get the valve to close. Now this looks real simple to make. I’m going to have to look at my parts bin , I hope I have a disco valve on hand.