Quote from: Rob M on December 15, 2019, 12:25:28 AMGreat idea. I've run that valve@ 1800 psi no issues so as long as you can control the final temp you're goodDid you have to modify the valve or hammer so that it would crack open at the higher pressure?
Great idea. I've run that valve@ 1800 psi no issues so as long as you can control the final temp you're good
That's good to know. I have one of these, but I never really tore into it. It's the one that comes with 3 barrels, 3-inch, 6-inch, and 8-inch. I like it a lot, but it's no powerhouse. 7.6 grain at 460-470fps with 8-incher, 420-430 with the 6. The biggest advantage to the 8" is that it quiets the gun down.I think George said on the second page of this thread that the valve volume is very small. There's definitely something holding these guns back. I thought it might be losing too much gas between the valve/clip/barrel, but maybe it's just not able to dump the gas fast enough...