GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Engineering- Research & Development => Topic started by: GarthThomas on April 09, 2020, 09:57:09 PM

Title: Craftex points
Post by: GarthThomas on April 09, 2020, 09:57:09 PM
What size of craftex point to clean up .22 leade?
I can get 6mm, would I need to size it down a bit first. How would I size one down, use my lathe? What cuts those things?
Title: Re: Craftex points
Post by: Motorhead on April 11, 2020, 01:36:14 PM
You can easily dress down the diameter of an oversize Cratex point against a belt sander, 80 grit sand paper on a flat surface etc ....
Once it is at the diameter that fits Polish away !!