GTA
All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Engineering- Research & Development => Topic started by: Backyard Shootr on November 23, 2019, 01:22:55 PM
-
I want to make a new air tube for the Urban out of aluminum tubing. Question: Is 6061 2.5mm wall aluminum tubing strong enough to hold 232 bar or more? The tubing I have is 30mm OD 25mm ID x 500mm. I also should ask if the threads for the fill probe will hold?
-
Interested to know also.
-
I tried to calculate the burst pressure but I'm not smart enough to figure it out. :'( Every time I tried I came up with a different figure. ;D